HOW TO SOLVE EASY ISSUE
1. Cardboard can’t be formed normally
It has relation with corrugated rolls balance, temperature, suction guard, cylinder or hydro-cylinder and etc. You can solve according to steps as below:
a. Check corrugated rolls balance and temperature .
b. Check suction ,for example if some air loss be existed by huge distance between lower corrugated rolls and suction guard ,or by rubbishes jammed?in suction guard ,or by suction plate worn out .
c. Check cylinder or hydro-cylinder working status.
d. You check if cardboard can be formed after you made items above on right condition. If not be solved, then you can send mail to us for support.
2. Glue hard or inhomogeneous?glue
It is?caused by different distance between glue roll and doctor roll, by distance between corrugated roll and glue roll, even be caused by rolls abrasion and glue problem itself . It is?essential?that you check them when you are solving this issue.
3. Other issues
As we know corrugated roll is key point in corrugated cardboard production industry, but we must realize that all parts of corrugated line is also source of problem issues. You can contact us or our authorized distributor for consulting.
We are pleasured for that.
Contact us or our authorized distributor for consulting.
Email:[email protected]