How to Set Up a Blown Film Extrusion Machine for PE Film
This step-by-step guide will help you set up and calibrate your?POLYSTAR blown film machine for PE film?so that it produces a film of the right thickness, width, and quality.
Step 1: Install the die head
Start by installing the die head on the extruder. The die head shapes the melted plastic into a tubular structure. Finally, make sure the die head is aligned and secure.
Step 2: Adjust the air ring
The air ring is responsible for cooling the plastic that is passing through the die head. To achieve the quality and thickness you desire, adjust the airflow and temperature.
Step 3: Calibrate the temperature and speed controls
Your machine's speed and temperature controls make sure that the plastic is heated and fed through the die at the proper rate. To ensure that the film is created with consistent quality, calibration is crucial. Set the temperature and speed controls to the levels that are suggested for your material to start, and then adjust as necessary to get the right results.
Step 4: Test the blown film machine
It's time to test the machine once you've placed the die head, adjusted the air ring, and calibrated the temperature and speed controls. Check the film for the desired thickness, width, and quality by running a trial of the material.
领英推荐
Tips for troubleshooting and maintaining your POLYSTAR blown film machine for PE film
You might run into typical complications during setup and calibration, like inconsistent film thickness, wrinkling or bumps in the film, or other problems. You should adjust the air ring, temperature, or speed controls to solve these issues. If you require extra assistance, don’t hesitate to get in touch with our sales and spare part team.
You can calibrate and set up your POLYSTAR blown film machine to make high-quality films quickly and easily by following these instructions. Don’t forget to perform regular maintenance and inspections to make sure the blown film machine is operating at its best.
This article originally appeared on POLYSTAR.
?? Sign up here to receive recycling & blown film extrusion news.
?? Visit POLYSTAR: www.polystarco.com