How to polish scratches with a polishing machine?
Zhengzhou Kamel Grinding Tools
Abrasives that work as hard as you do.
Scratches on the surface of a vehicle can be unsightly and diminish its overall appearance. Fortunately, with the help of a #polishing machine, it is possible to effectively grind and polish these scratches, restoring the paintwork to its original shine. In this guide, we will outline the step-by-step process for using a polishing machine to treat different levels of scratches, from hairline scratches to deeper ones.
1. Treatment for Hairline Scratches:
- Begin by #cleaning the vehicle with car wash detergent without drying it.
- Apply the polishing compound evenly onto the paintwork using a damp polishing pad attached to the polishing machine.
- Start the machine and gently place it on the affected area, maintaining a speed of 1800-2200 rotations per minute (RPM).
- Perform one round of polishing, followed by a water spray to aid in the polishing process.
- After completing the moderate polishing, rinse the paintwork with clean water to remove any residual polishing compound.
- Apply mirror finishing compound onto the paintwork using a fresh polishing pad.
- Once again, place the polishing machine gently on the surface, maintaining a speed of 1800-2200 RPM, and perform one round of polishing.
- Finally, clean the vehicle with car wash detergent, dry it, and proceed to seal the paintwork or apply wax for protection.
2. Treatment for Light Scratches:
- Start by #cleaning the vehicle with car wash detergent without drying it.
- Use fine-grit sandpaper (1500-2000) to sand down the scratched area until the paintwork loses its gloss.
- Apply deep polishing compound evenly onto the paintwork using a damp #sanding pad attached to the polishing machine.
领英推荐
- Start the machine and gently place it on the paintwork, maintaining a speed of 1000-1400 RPM.
- Perform one round of sanding, followed by a water spray to aid in the process.
- Once the deep polishing is complete, use a cleaning agent to wash the paintwork and remove any residual polishing compound.
- Apply the polishing compound evenly onto the paintwork using a damp polishing pad.
- Start the machine and gently place it on the surface, maintaining a speed of 1800-2200 RPM, and perform one round of polishing.
- Follow up with a water spray to aid in the polishing process.
- After completing the moderate polishing, rinse the paintwork with clean water to remove any residual polishing compound.
- Apply mirror finishing compound evenly onto the paintwork using a fresh polishing pad.
- Once again, place the polishing machine gently on the surface, maintaining a speed of 1800-2200 RPM, and perform one round of polishing.
- Finally, clean the vehicle with car wash detergent, dry it, and proceed to seal the paintwork or apply wax for protection.
Email：[email protected]