How To Operate The Air Powered Rock Drill?

Air?powered rock drill, also known as pneumatic rock drill, is a tool primarily?work?in construction and mining for drilling holes into rock or concrete surfaces. And it work with an air compressor, making it suitable for outdoor use where electricity might not be available. This article will introduce how to operate a rock drill machine.

Subscribe Youtube for more video: https://www.youtube.com/watch?v=w37FPj81e3U

5 Steps to operate the air powered rock drill?

1. Before operating the rock drill, you need to understand the rock drill manual and ensure that the operator has received relevant safety training. At the same time, check whether all parts of the rock drill are good. Especially whether key components such as the drill bit, cylinder, and piston are working properly.?And?it is necessary to firmly fix the rock drill on the rock. Generally, using steel frames, wedges and other fixing methods to ensure the stability and safety of the rock drill.

2. The drill bit of the rock drill is a key tool for breaking rocks, and adjust?it?according to the hardness and cracks of the rock. Make sure that the contact area and angle between the drill bit and the rock are reasonable to achieve the best breaking effect.

3. Before the formal rock drilling,you can do a test drill. First, open the air valve of the rock drill, make the cylinder move back and forth several times. And?then?observe whether the rock drill works normally. At the same time, check whether the impact force and penetration force meet the requirements.

4. After the test drilling confirms that the rock drill is working properly,you can carry out?the formal rock drilling. The operator needs to control the switch of the rock drill to make the cylinder move back and forth. And at the same time observe whether the impact force and penetration force of the rock drill meet the requirements. The rock drill needs to remain stable during the drilling process to avoid shaking or tilting.

5. After finishing the rock drilling,please remove?the rock drill from the rock and inspect and maintain?it. Clean the rock powder on the surface of the drill bit. Then?check whether the key components such as the cylinder and piston are worn or damaged, and repair and replace them in time.

?

?In short, the correct operation of the?air powered?rock drill?requires a series of steps and precautions. During the actual operation, the operator must strictly abide by the relevant safety regulations to ensure the safety. If you encounter any problems or difficulties, please contact professional technicians for consultation and processing in time.?Contact BESTONE: https://www.bestonedrill.com/contact-us/?

?