HOW OFTEN DO YOU GREASE

PRO-MA MBL (METAL BASE GREASE) SUPERIOR LUBRICANT

Has a lithium complex base and is a superior lubricant due to its micro-metallic particles. It can be used in some automatic greasing systems, universal joints, suspension and steering joints, wheel bearings, electric motor bearings, axles, winches and gear boxes (where grease is specified). The three key areas of benefit are, the grease has 4% water wash out benefit very good for marine application, mud and slush or wet conditions, wheel bearing, earth moving equipment and all industrial uses. It has a very high load capacity and a technical temperature rate of – 40 degrees centigrade to + 280 degrees centigrade best as the constant operating temperature is 210 degrees centigrade.

How often do you grease? Many operators have testified that they once greased machinery on a daily basis, but are now lubricating the same machinery every third or fourth day due to the unmatched qualities of MBL grease. It has this threefold actions Lubrication, Plating and Penetration.

It’s probably expensive you may buy but it becomes cheaper than you ever purchased because it lasts 5 -7 times longer than any other grease. This is best for all , heavy duty machines, trucks, earth moving equipment, cranes, winches, forklifts and semi-trailers as well as it saves 20% of their wear factor front tyres as when you smear the grease there will be no shattering as they are turning. All concrete businesses must use our grease for their concrete batching trucks for its concrete bowls especially for its truncheon bearings because when it snaps, it’s going to very expensive to replace the bowl.

For domestic, commercial and industrial use of our MBL products save on your operating, maintenance and downtime costs. For example if you now are now spending K 100,000.00 per year on grease alone, constant usage of our grease can save up to 25% which is K 25,000.00 per year in monetary value but it also saves all associated costs as mentioned. OUR RPODUCTS SAVES YOU RUNNING< MAINTENANCE & DOWN TIME COSTS.