How to Maintenance and maintain electronic crane scales in the rainy season
In the gloomy rainy season and the rain continues, the degree of moisture on the ground is very different from the air, so it is very important for the maintenance and maintenance of electronic crane scales. It is recommended that customers prepare for protection and protection from suffering from a dryer that is very necessary and of appropriate size.
Coming before the rainy season, I am connecting 1-2 bag dryers (using gauze bags) and putting them in the box, and regardless of whether the dryers are periodically checked for changes in appearance, replace them in time if they change.
If it is determined that the performance of the weighing instrument based on the influence of humidity and cold is messy in value and there is no prescribed standard measurement of drift, the method of segmentation scale should be used in the division.
1.Rest line processing contact
If once the line is rested, but a sympathetic machine cable or a cable to electricity is used as a signal, the connection line should be watertight and completely enclosed. (The surrounding is completely closed with cup gum)
2.Drain
The shallow roots make the foundation of the truck scale scars. It should be checked regularly whether the drainage outlet is not obstructed and whether the drainage ditch is circulating as usual; if there is heavy rainfall-the storm should have been specially allocated to discharge the water in the accumulation position of.
3.Deal with contacts
All connection lines (including aD type nine cores and D type 25 core plugs) connecting words should have no loose movement.
4.Connect a wire box to handle the contact place
This check connects all the shielding plank screws of the first-line box whether all the Nings are tight; the connection into the electronics is Heng, this machine transmits ABS, and feels whether the machine’s electrical cable processing and contact are tight (with the hand The cable, whether the submarine telegram is relaxed or not is similar -), if the ABS process and the contact Ning are already tight but the cable is still relaxed, you can use glass rubber to get inside to seal the wire place completely to the wear.