How long does it take for the push-pull force gauge loadlink to enter the standard state?

How long does it take for the push-pull force gauge tension load cell to enter the standard state?

The tension meter loadlink can be said to be a high-tech testing instrument. Although its operation is relatively simple, there are also some details that require everyone to pay more attention to it, so as to ensure that the detected data is more accurate. Let's listen to how professionals analyze and introduce it.

1:Before operating, you must carefully read the instructions of this type of equipment, so that you can master each operation step more correctly.

2:In addition to reading the manual carefully, when measuring, be sure to keep the measuring head and the product we want to measure at a vertical angle, so that the detection can be more accurate and there will be no large deviation in size.

3:In addition, because a certain tension pressure loadlink must be adopted when using it, the tension pressure must be kept uniform at this time, otherwise it is easy to cause the data on the test instrument to have wrong deviations.

4:If you use a push-pull force gauge tension load cell to measure textiles or printed products, the relevant operators should perform inspections immediately after the textiles and printed products are dry to make the measurement data more accurate.

5:No matter what objects are tested, the dirt on the testing instrument should be cleaned. In order to do a good job of cleaning and maintenance regularly, check and repair the possible faults of it. If parts are found to be severely worn or invalid, they must be replaced in time.

6:If it is not used for a long time, it should be placed in a dry and ventilated indoor environment, and the surrounding dirt and surface dust should be removed regularly.