How to Install Cctv Power Supply Box?

Installers of surveillance systems may simply control the power to various CCTV cameras using a CCTV power supply box, also known as a power distribution box (usually at the location of the DVR). This enables a cleaner camera installation.

Surge protection can be accomplished in two ways. There is a standard fuses security camera power supply box and a PTC auto-reset fuses security camera power supply box. The PTC has the benefit that it does not burn out. When a circuit is overloaded, the PTC disables the circuit. The PTC automatically resets the fuses when the load is fixed. As a result, there are no burnt-out fuses to replace.

Installing these boxes is a breeze as long as you use products from reputable enclosure manufacturers. The power cord for each camera simply screws into the box’s power distribution block. A regular power outlet is used to connect the power supply box. Installation does not necessitate the use of an electrician. PTC auto-reset fuses are now used in all of our boxes.

Normally, you’d install your power supply box near your DVR on a wall. A typical 110-120 volt AC power wall socket with a 3-prong power chord would be used to power the box. For the power supply box, there is a power switch. It activates all of the ports.