How to Reduce maintenance Cost of IP Cameras in the infrastructure

How to improve the operation and maintenance efficiency of network cameras in the infrastructure

The infrastructure includes traffic, bridges, roads, streets, hospitals, schools and other places. Now, a large number of network cameras are used in these infrastructures to monitor road safety, violations, and accidents.

So how to improve the operation and maintenance efficiency of network equipment and network cameras in these infrastructures?

The current status of network equipment and network camera operation and maintenance in the infrastructure is: when the front-end network equipment fails, the operation and maintenance company must arrange for professional personnel to go to the site for inspection and maintenance, which leads to a lot of labor costs, especially in heavy traffic. , remote suburbs and other areas.

In view of this situation, Barium-Rhenium Technology has in-depth communication with many network equipment operation and maintenance companies, and jointly proposed a new solution.

According to the working principle and characteristics of network equipment, the barium-rhenium technology analyzes the common failure causes, including the following:

1. The external power supply of the device fails, causing the network device and network camera to fail to work;

2. The network equipment or network camera may not work due to abnormal operation due to long-term operation in harsh external environment;

3. Network transmission equipment such as industrial switches or routers work for a long time, so that the network equipment and network cameras connected to the back end cannot be connected to the monitoring center.

In view of these reasons, RTU5028E network fault diagnosis device adopts targeted technology to perform intelligent diagnosis and identify fault factors, and provide automatic or remote restart of network equipment to solve the problem.

1. The RTU5028E network fault diagnosis device adopts intelligent discrimination technology, which can automatically identify the reason why the network equipment cannot be connected to the monitoring center is caused by power failure or network equipment failure;

2. If the network equipment is faulty, the network fault diagnosis device can automatically restart the equipment, or restart the equipment remotely to solve the problem.

3. If it is caused by a power failure, you only need to notify the power supply department to solve the problem.

As a result, it is not necessary to dispatch professional maintenance personnel to the site to investigate and solve the problem, which greatly improves the timeliness of problem solving, and greatly reduces the high maintenance cost of dispatching personnel.