How the Humans of Data Landed Man on the Moon

How the Humans of Data Landed Man on the Moon

I originally wrote this post on the Atlan Humans of Data publication.

On July 20, 2019, we complete fifty years since humans officially landed on the moon for the first time in 1969. This historic feat of accomplishment is often synonymous with two names—Neil Armstrong and Buzz Aldrin. 

That’s not the complete picture. 

While we celebrate the legendary astronauts who first stepped on the moon, their achievement wouldn’t have been possible without the hard work and dedication of countless others.

Here’s the story of the humans of data behind the Apollo 11 mission.

1955-1975: The Space Race

In 1957, the Soviets had launched the first satellite, Sputnik. After that, they sent humans to space.

The Soviet dogs Belka and Strelka (left); Cosmonauts Valentina Tereshkova and Yuri Gagarin (middle); Cosmonaut Alexei Leonov (right)

The Soviet dogs Belka and Strelka (left); Cosmonauts Valentina Tereshkova and Yuri Gagarin (middle); Cosmonaut Alexei Leonov (right)

All that was left was sending the first human to the moon.

1961: A Herculean Task for NASA

As the Soviets seemed to be winning the space race, former U.S. President John F. Kennedy issued a challenge to NASA (National Aeronautics and Space Administration). 

In 1961, President Kennedy set a goal for NASA to “land a man on the moon and return him safely to the earth,” within the next 10 years.

The mission seemed impossible as the U.S. didn’t even have a spacecraft to take humans to the moon, a computer compact enough to do the navigation, spacesuits, knowledge of the effects of prolonged weightlessness or space food. 

They didn’t even know what they would need, and whether humans could even think in zero gravity conditions.

1961-1969: NASA Gets to Work

The U.S. poured $25.4 billion into the moon landing effort. NASA hired people from different organizations such as Boeing, North American Aviation, McDonnell Douglass, Grumman Corporation, MIT to work on a nationwide project called The Apollo Program.

Managing such a large nationwide team with diverse skills fell onto the shoulders of George E. Muller, now known as “the father of the space shuttle.”

George Muller, the Deputy Associate Administrator for Manned Space Flight at NASA, briefs President John F. Kennedy and senior officials. Photo courtesy: NASA

George Muller, the Deputy Associate Administrator for Manned Space Flight at NASA, briefs President John F. Kennedy and senior officials. Photo courtesy: NASA

He transformed management in NASA by introducing radical approaches. One such approach was the ‘all-up’ testing method that allowed several systems to be designed and developed in parallel, drastically reducing design time.

Another approach was to organize personal visits from the NASA astronauts to the factories developing the parts of the Apollo program spacecraft. The visits made the factory workers realize that a single error could kill the man they met, motivating them to devote their lives to Apollo. 

The Computers of the 1960s

A major challenge that NASA faced was building a computer small enough to fit onboard a spacecraft. Even the most compact “minicomputers” were as big as 2-3 refrigerators placed next to each other.

Designed by 3C, the DDP 116 was the world’s first commercial 16-bit minicomputer.  Photo courtesy: Computer History Museum

Designed by 3C, the DDP 116 was the world’s first commercial 16-bit minicomputer. Photo courtesy: Computer History Museum

NASA also had to defy the popular notion that computers weren’t reliable. Back then, computers had a bad reputation as they broke down every few hours.

After several years of experimentation to reduce the size of the Apollo spacecraft computer and boost its computing power, the engineers and scientists at MIT and NASA had a major breakthrough.

They used the IBM mainframe computers on the ground to make course calculations and feed navigation data to an AGC (Apollo Guidance Computer) onboard the spacecraft. The AGC would only perform specific tasks such as guidance, navigation, and spacecraft control.

While the mainframe computers were the size of a car, the AGC was compact, weighing only 70 lbs (approximately 32 kgs) and taking up less than 1 cubic foot of space.

The IBM mainframe computers on the ground (left); The AGC onboard the spacecraft (right). Photo courtesy: NASA

The IBM mainframe computers on the ground (left); The AGC onboard the spacecraft (right). Photo courtesy: NASA

Another major issue with computers was the integrity of the memory. There were concerns that the AGC’s memory could be compromised due to a potential Soviet attack.

To build a memory that could not be erased, modified or corrupted in any way, MIT used a technique called rope memory, where small iron rings had wires running through them.

A wire running through the center of the ring represented ‘1’, whereas a wire that ran outside represented ‘0’.

A seamstress weaving the software for the guidance system computer. Photo courtesy: Computer History Museum

A seamstress weaving the software for the guidance system computer. Photo courtesy: Computer History Museum

Over eight weeks, the program was literally weaved into the memory by skilled seamstresses who wove wire-carrying needles through the iron rings, one wire at a time.

1968: Apollo 8 Orbits the Moon 

A year later, NASA launched Apollo 8—the first crewed spacecraft to leave the Earth’s orbit, reach the Moon, orbit it, and return.

Apollo 8 performed 10 circumlunar orbits within 20 hours and safely returned to Earth.

Following the success of Apollo 8, on May 18, 1969, NASA launched Apollo 10 as a “dress rehearsal” to the actual lunar expedition. The Apollo 10 crew was tasked with testing all the elements of a moon landing, without actually descending onto the lunar surface.

All that was left to do was launching the mission that landed humans on the moon.

July 19, 1969: From Earth to the Moon

After traveling for 75 hours and 50 minutes, Apollo 11, carrying a crew of three astronauts—Neil Armstrong, Edwin “Buzz” E. Aldrin Jr., and Micheal Collins—finally entered into a lunar orbit.

The three-stage 363-foot rocket used its 7.5 million pounds of thrust to propel itself into space.

The three-stage rocket that flew humans to the moon.  Photo courtesy: NASA

The three-stage rocket that flew humans to the moon. Photo courtesy: NASA

Everything was going smoothly and the Lunar Module (LM) “Eagle” was on its way to land on the moon, roughly 46,000 feet away, when things suddenly went awry.

With Just 30,000 Feet to Go, the Computer Crashes 

Minutes before the LM was about to land, the AGC had crashed. The screen went blank.

Program alarm. It’s a twelve-oh-two. Give us a reading on the 1202 program alarm.

Apollo 11 Commander Neil Armstrong reached out to Mission Control, Houston.

When the program alarm 1202 flashed on the screen, it sent the astronauts in space as well as the entire Mission Control at Houston into a panic. During their simulations, the astronauts had never come across either of these errors and didn’t know whether to keep going or to abort the mission.

Over the next seven and a half minutes, the alarms went off five more times.

With the Eagle rapidly descending, a decision had to be made quickly.

In Mission Control, mission guidance officer Steve Bales immediately called his colleague Jack Garman, an engineer who sat in a backroom and maintained computer error codes on his console as a cheat sheet.

Garman replied to Bales saying it was an executive overflow, which gave the astronauts the go ahead to proceed with the mission.

Overloaded with Data, the AGC Does What It Was Built to Do

Computers in the 1960s had less computing power than the smartphones of 2019. When the AGC was overloaded with data, it dropped everything else to perform its core function—navigate and guide the astronauts. 

Dropping the other functions required a system reboot, which is why the AGC flashed the 1202 alarm. With every overload, the AGC dropped more low-priority programs and rebooted to continue navigation and guidance. Mission Control relayed the same to the astronauts in the LM and the mission to the moon went on.

Jack Garman’s cheat sheet with a list of all Apollo alarm codes.  Photo courtesy: Collect Space

Jack Garman’s cheat sheet with a list of all Apollo alarm codes. Photo courtesy: Collect Space

That’s when a more dangerous problem confronted the astronauts.

With Two Minutes to Land (or Crash), Things Go Out of Control

As the astronauts were occupied with decoding the program alarms, they overshot the intended landing area in the Sea of Tranquility by several miles.

With just 1,500 feet to go, Commander Neil Armstrong finally looked through the window display. That’s when he realized that the Eagle was speeding towards a crater with steep sides. 

A NASA video shows the difference between simulations on the ground to the actual moon imagery while landing.

NASA video shows the difference between simulations on the ground to the actual moon imagery while landing.

The spacecraft was also quickly running out of fuel—just 60 seconds of fuel left—and headed towards a deep lunar pit full of boulders bigger than a bus.

It was also too late to retarget the AGC for finding a more suitable landing point.

That’s when data and years of extensive experience came to the rescue.

The Extraordinary Astronauts Calculated the Landing Point Manually

With no computer to rely on, Neil Armstrong took manual control of the Eagle and tapped into his experience as a pilot to fly The Eagle like a helicopter. With minutes left and the fuel levels dangerously dropping, he kept his cool and trusted his experience.

Buzz Aldrin supported him by continuously monitoring altitude data from the AGC console. Together, they calculated manually the right spot for landing the Eagle without crashing.

July 20, 1969: The Eagle Has Landed

Thanks to their calculations and skills, the Apollo 11 astronauts had found the nearest spot to land in the Sea of Tranquility.

Houston, Tranquility Base here … the Eagle has landed.

The efforts, dedication, and composure of the astronauts in the final moments of the mission was the reason why humans made it to the moon successfully.

Without them, the outcome would have been completely different.

Neil Armstrong (left), Buzz Aldrin (centre), and Micheal Collins (right).  Photo courtesy: NASA

Neil Armstrong (left), Buzz Aldrin (centre), and Micheal Collins (right). Photo courtesy: NASA

Neil Armstrong planting the U.S. flag on the moon (left); the Earth as observed from the moon (right).  Photo courtesy: NASA

Neil Armstrong planting the U.S. flag on the moon (left); the Earth as observed from the moon (right). Photo courtesy: NASA

July 24, 1969: To the Moon and Back

After a flight of 195 hours, 18 minutes, 35 seconds, the Apollo 11 mission successfully returned to Earth and safely splashed down in the Pacific Ocean. 

NASA had kept its promise to the late President Kennedy with still a few months to spare.

The Apollo 11 crew landing in the Pacific Ocean. Photo courtesy: NASA

The Apollo 11 crew landing in the Pacific Ocean. Photo courtesy: NASA

Humans of Data Behind Apollo 11’s Success

The moon landing was a success due to the efforts of over 400,000 people from several organizations nationwide, working tirelessly.

From engineers, scientists and technicians who built the spacecraft to the incredible astronauts who landed Apollo 11 on the moon, humans of data were there at every step of the way.

Thanks to their efforts and dedication, we were able to finally set foot on the moon.

要查看或添加评论,请登录

社区洞察

其他会员也浏览了