How does iocharger overcome charging load challenges?
iocharger

How does iocharger overcome charging load challenges?

With the rapid growth of electric vehicles and EV charging equipment, the power grid will face great challenges. In order to meet the demand for charging and protect the safe operation of the power grid, Iocharger has launched Dynamic Load Management solutions for both residential and commercial.

What is Dynamic Load Management?

In the context of EV charging, dynamic load management (or DLM) refers to optimizing a property's charging loads to ensure the most efficient use of the power available between EV Chargers and other appliances on-site and protect local grid network from overloading, without spending on a dime on expensive construction work.

Benefits of Dynamic Load Management

Now days load sharing becomes more and more important as the number of chargers and vehicles increases.

For example, there are some scenarios where electric panels are oversubscribed purposely to accommodate more chargers than typically possible. Let’s consider a parking lot with 50 spots and 50 chargers. In most cases, it is rare that all 50 chargers will be used at the same time. This could be for a variety of reasons, such as some parking spots are occupied by non-EVs, some vehicles have already finished charging and are simply parked, or the parking lot happens to be quiet at that time of day, etc. Therefore, the site’s total capacity might be significantly less than the power required to use all 50 chargers at the same time, since it is anticipated that not all the chargers will be used simultaneously.A dynamic load management system ensures that the power is split evenly across all the active chargers safely and efficiently. In the event that the total load at the site exceeds the available capacity of the parking lot, for example, when all 50 chargers are in use, the Load Management system will limit the power supply to the chargers, allowing vehicles to charge but at a slower pace. This form of managed charging allows more chargers to be installed at a location and grid upgrades can be avoided.

What is iocharger's dynamic load management solution?

?

Iocharger is providing several levels of load management for residential and public, dynamically balancing the power distribution to the charging stations via software or smart OCPP gateway.

Level 1 - EV Chargers Only

图片无替代文字

Dynamic Load Management without extra device, supporting up to 252 EV Chargers, which can work either offline or online.

Step 1, Connect a group of EV Chargers in the same LAN network, and configure one charger as the master charger and rest of them as slave chargers,

Step 2, Set a maximum total charging load via master charger web portal,

Now the system controls the charging power of each individual EV Charger automatically.?

图片无替代文字

It can also be live monitored if all the EV Chargers are connected to iocharger OCPP backend system.

?

Level 2 - EV Chargers & Other Load Appliances

图片无替代文字

In this mode, dynamic load management considers the grid supply and real-time building consumption to offer the available power to the EV Chargers.

Step 1, Connect a group of EV Chargers in the same LAN network, and configure one charger as the master charger and rest of them as slave chargers,

Step 2, Set a maximum total charging load via master charger web portal,

Step 3, Connect iocharger Gateway Hub/Kiosk to monitor the live consumption of other load appliances via CT clamp or Meter,

Now the system controls the charging power of each individual EV Charger automatically, without causing any overloading to the complete grid network.

?

For example, Residential dynamic load Management as below,

图片无替代文字

The system can distribute dynamic power to the EV Charger via monitoring the power consumption of other home appliances.

Level 3 - EV Chargers & Loads & Solar/Battery

图片无替代文字

This is a typical application of dynamic load management supporting more complex integration of EV chargers, different loads, solar PV system and battery storage.

It can dynamically adjust the optimal charging strategy in real-time, maximize the use of different power sources from the grid, PV system and battery storage.

?

iocharger Dynamic Load Management-Advanced Energy Management Solution

图片无替代文字

Benefits:

  • Protect local grid network from overloading when multiple chargers are being used
  • Ensure the most efficient use of the power available between EV Chargers and other appliances on-site
  • Save you from the costs of any grid upgrades
  • Provide real-time data on your energy usage, solar production, or even battery capacity
  • Manage different charging modes like Full speed, solar assist and solar only
  • Eco-friendly with pubic grid, solar system and battery system

?About iocharger

Iocharger, a professional OCPP EV Charging & Energy management solution provider, established in 2017, located in Xiamen Fujian province PRC.

As a member of OCA & OCPI, we provide the most value service for our customers, smart home charger, AC charger with OCPP, DC charger, Residential Engergy Storage, OCPP charge point management system, software service...

more information please visit www.iocharger.com or send email to [email protected]

?

要查看或添加评论,请登录

厦门银河龙芯科技有限公司的更多文章

社区洞察

其他会员也浏览了