How do turbo diamond blades perform on different grades of granite?

Turbo diamond blades are highly effective for cutting granite, but their performance can vary depending on the grade of the granite. Here’s how they perform across different grades:

1. Low-Grade Granite

Low-grade granite, often referred to as commercial or entry-level granite, tends to be more porous and softer than higher grades. Turbo diamond blades perform very well on low-grade granite due to its relatively softer composition. The blade cuts through the material smoothly with minimal resistance, and the cutting speed is generally faster. However, because low-grade granite is more prone to chipping, it's important to use a blade with a finer edge to achieve clean cuts.

Key Performance Points:

- Cutting Speed: Fast

- Blade Wear: Moderate

- Finish Quality: Good, with potential for minor chipping

2. Mid-Grade Granite

Mid-grade granite offers a balance between hardness and durability. Turbo diamond blades are well-suited for this type of granite, providing a good balance of cutting speed and durability. The blade maintains a steady cutting rate, and the material’s hardness helps in achieving a smooth finish with minimal chipping. This grade is where turbo blades really shine, offering excellent performance without excessive wear.

Key Performance Points:

- Cutting Speed: Moderate to Fast

- Blade Wear: Moderate to Low

- Finish Quality: Excellent, with minimal chipping

3. High-Grade Granite

High-grade granite is the hardest and most durable of the grades. While turbo diamond blades are capable of cutting through this dense material, the cutting speed is slower due to the granite's hardness. The blade may experience increased wear and require more frequent cooling to prevent overheating. Despite these challenges, turbo blades can still produce clean, precise cuts on high-grade granite, though the operator needs to be more patient and use proper technique.

Key Performance Points:

- Cutting Speed: Slower

- Blade Wear: Higher

- Finish Quality: High, with precision cuts and minimal chipping

General Tips for Cutting Granite with Turbo Diamond Blades

- Cooling: Always use water or another coolant when cutting granite to reduce blade wear and prevent overheating.

- Cutting Speed: Adjust the speed of your saw or angle grinder based on the hardness of the granite.

- Pressure: Apply consistent, moderate pressure to avoid chipping, especially on low-grade granite.

- Blade Maintenance: Regularly inspect the blade for wear and replace it when necessary to maintain optimal performance.

Turbo diamond blades are versatile tools that perform well across different grades of granite, though the specific performance characteristics will vary depending on the material's hardness and density.

JDR Diamond Tools Co., Ltd.

Address:Huangtang,Xiake,Jiangyin,Wuxi,Jiangsu,China

Tel:86-510-86531604?????????????Fax:86-510-86533978

Whatsapp:008613506163439

Email:[email protected]

#TurboDiamondBlades#GraniteCutting#StoneCuttingTools#DiamondBladePerformance#GraniteGrades#HighGradeGranite#MidGradeGranite#LowGradeGranite#StoneFabrication#CuttingGranite#DiamondBlades#ConstructionTools#StoneWork#GraniteSawBlades#StoneCuttingTechniques