How do I Convert a Speaker into Subwoofer?

How do I convert a speaker into a subwoofer? A common question of the audiophiles. The cross-over of tweeters in a speaker can be removed, the bass unit attached with the?subwoofer, the box built, additional resonant elements added, and the ports sealed.

Things To Know

The cross-over of tweeters can be removed, the holes can be covered, the base unit can be attached to the subwoofer, a box can be built, additional resonant elements can be added, and the ports can be sealed.

How do I Convert a Speaker into Subwoofer?

Add resonant elements using a higher-order filter to extend the low-frequency response. The deep stuff can be either another cone that isn’t driven or a hole in the box with a tube attached that uses the mass of the air in the line working together with the compliance of the box air.

If you want this filter to work, you have to choose the sizes carefully. With this type of speaker, you can have a higher cut-off point for the same efficiency or a lower cut-off point for the same efficiency, but it drops off faster below the cut-off point at 12dB per octave. Depending on the alignment, there is a chance that it sounds boomier than the sealed box.

There are resonant modes in the room, which can affect the bass performance you receive, and for excellent results, you must consider them.

If you want to know the full answer visit our website