How to clean ultrasonic parts of car supercharger?

I. equipment use: cleaning dust, oil and other pollutants on automotive supercharger parts (cast iron).

Cleaning car supercharger parts (cast iron)

II. Ultrasonic cleaning process: hot dip--ultrasonic rough cleaning--ultrasonic fine cleaning--spray cleaning--rinsing--drying.

III. Cleaning process chart:

IV. equipment composition:

Automotive supercharger parts ultrasonic cleaning machine mainly consists of ultrasonic generator, transducer, cleaning tank, liquid storage tank, spray tank, circulating filtration system, automatic temperature control heating system, spray system, feeding and discharging trolley, gantry dobby It consists of a manipulator, a tossing device, an infrared drying device, a frame, a control panel, a fully enclosed cover and a control system.

The cleaning machine is fully automatic, the cleaning process is controlled by a microcomputer, Six hot dipping tanks, spray tanks, ultrasonic rough cleaning tanks, ultrasonic fine cleaning tanks, rinsing tanks and infrared hot air drying devices made of stainless steel. Continuous working device.

The operator places the cleaning blue with the workpiece on the feeding and discharging conveyor. The gantry dobby robot sends the cleaning basket to each process section in sequence. After a series of cleaning and drying of the workpiece, the cleaned workpiece is sent to the input and output.

Conveying trolley, the operator unloads the workpiece at the entrance and exit. The entire washing machine dryer is fully enclosed, and is equipped with a detachable observation and inspection door. The specific structure is shown in the drawings and the following description. .