How to chose A Jet Pump
GP Deep well convertible jet pump

How to chose A Jet Pump

Jet pumps are above-ground pumps that come in two types shallow well and convertible well.

  • Shallow well pump has one pipe on the front that pulls water from a maximum depth of 25 feet.
  • Convertible jet pump usually used for deeper wells typically has two pipes on its front that pull water from up to 110 feet.

GP Shallow well Jet pump

One of the best and easiest ways to choose a pump is to go with the same kind you had before.If you're replacing a shallow well pump stay with a shallow well pump and if it's a convertible well pump substitute it with another convertible well pump. You can also check out the performance charts on each pumps packaging to determine.If the pump is ready for the depth of your well that's also where you can find well pump specifications pumps come with different horsepower voltage and equipment.

Deep well convertible jet pump

In general, higher horsepower will increase the depth you can pump from and provide more flow and pressure.It's a good idea to choose the same or higher horsepower when selecting a replacement pump most jet pumps are dual voltage, and can be set for either 230 volt or 115 volt to match the electrical requirements to determine your voltage.

Go to the breaker box and find the switch for your pump if it's a dual switch its 230 volt, and if it's a single it's 115.

Additional equipment could affect how well your pump works too.When you replace your jet pump we also recommend replacing the foot valve faulty. Foot valves will result in a pump losing its prime continuously and not pumping water which is the most common reason for pump failure.The air tank should also be checked, Standard air tanks are around 40 psi when the pump is idle. ?If an air tank becomes faulty it can result in low pressure or the pump running continually for deep well applications.It's essential to replace the ejector along with your pump not only could the existing ejector be worn out but each model and manufacture have a different ejector type.

?

If you have additional questions you can check the troubleshooting guide in the installation manual or call the toll-free helpline number which can be found on the our GP box.

For your safety please read and understand all instructions and warnings before installing your new pump.

要查看或添加评论,请登录

Ava Shue的更多文章

  • Booster pump failure and elimination

    Booster pump failure and elimination

    What is a booster pump?Its main uses are water pressurization, Maintains and increases municipal water pressure…

  • HOW A YARD HYDRANT WORKS

    HOW A YARD HYDRANT WORKS

    Yard Hydrants are a Non-Freeze Valve that helps provide water all year round. This product is used in many applications…

  • How to chose A sump pump?

    How to chose A sump pump?

    Sump pump is now more and more widely used,many customers do not know how to choose their own sump pump.In fact, you…

社区洞察

其他会员也浏览了