How to Choose a Slitting Rewinding Machine?
This article is to help you to understand more regarding a slitting rewinding machine.
First please confirm your material type:
With adhesive: like double-sided tape, foam tape, masking tape, etc.
OR without adhesive: like paper, film, label stock, non-woven, etc.
Here’s a sneak peek of a slitting rewinding machine
Unwind Unit:
Unwind base: for jumbo roll diameter within 800mm recommend connect type;
If jumbo roll diameter is over 800mm, a separate unwind base will be recommended.
Unwind shaft
With shaft: regular type, cost-effective
Shaft-less unwinder: operation is easy, two chucks fix jumbo roll, just cost is higher.
Knowledge of Slitting Blades:
1)razor blade: for thin films, such as BOPP, etc. Advantage: lower cost and easy to set up.
2)shear blades: widely used, high accuracy
3)air score blade: mainly for adhesive tapes, non-woven, etc. more difficult to set up.
Edge Trimming Methods
1)Surface trim spool winder: for adhesive tapes
2)servo trim spool winder: for non-adhesive material or low-adhesion material, and not easy tear type
3)centrifugal fan trimming: non-adhesive paper, thin film, etc.
Rewind Unit
Rewind O.D. Specifications:
450mm, 650mm, 800mm and 1200mm (different materials with different OD, the web path will be different)
Rewind Shaft:
Air shaft: suitable for materials with very even thickness.
Differential shaft: separately control tension, when material thickness is not average,
it’s a must to install differential shafts
Web Guide Control System:
Unwind EPC: only unwind base move
Process EPC: unwind base not move, only the middle part is moving, used more for coating machines
To understand more about slitting rewinding machines, please contact our sales for an inquiry form and get an offer today.
Self Employee at Standard carton Industry LLC
5 年Good to see you
Self Employee at Standard carton Industry LLC
5 年Hi, my friend
Self Employed
5 年Thanks
Self Employed
5 年Let me have your contact information please