How to Calculate Thread Rolling Penetration Rate on CJWinter Pneumatic Attachments
Over our 60 years of providing thread rolling solutions, CJWinter has fielded several questions about the process — including dies, attachments, and other related tooling.
One of the most common questions we receive is: “How should I calculate thread rolling penetration rate?”
To help, we put together this quick three-step guide to determine the right penetration rate for your thread rolling application.
Step 1: Blank Diameter and Attachment Adjustments
Balancing?blank diameter, pitch diameter, and major diameter is a sensitive process. With the proper pitch diameter achieved, you can begin narrowing down to the proper major diameter — important for calculating penetration rate.
Achieving the correct major diameter usually requires increases in blank diameter. Because the major diameter increases proportionally to the blank diameter at a rate of three times, it is important that blank diameter be increased in the smallest possible increments.
In increasing blank diameter to achieve the proper major diameter, you are also increasing?thread roll?penetration resistance, essentially lowering penetration rate, also known as feed rate. A skewed penetration rate leads to a skewed pitch diameter. To correct the penetration rate, control the depth of penetration by making careful adjustments to the pitch diameter using the proper knob on the attachment.
Step 2: Determine Part Revolutions
The final application of your product, as well as its material, determines the ideal number of part revolutions in the thread.
In the thread rolling process, part revolutions directly?relate to thread roll penetration. A method of penetration rate control, as it relates to part revolutions, is the control valve assembly — adjusting the flow control valve on the assembly’s “out” line will adjust penetration rate and part revolutions.
Because control valve?assemblies?have no clearly defined metrics by which to set them, penetration rate-expressing terms such as “inches per revolution” and “rolling time” are of estimation value only. To accurately and precisely determine and set a penetration rate, there is a simple five-step process:
As an example, a brass blank with a thread size of ?-16 being machined with attachment?160-SA?will have recommended part revolutions of 8 and 3 thread starts on a thread roll.
8 / 3 = 2.7
The penetration rate control valve should be adjusted to the point that the adjusting collar of the compensator mechanism makes between 2.5 and 3 revolutions.
领英推荐
Step 3: Remember the Formula
Penetration rate can also be calculated in terms of rolling time. The rolling time calculation is particularly useful in that it can be used to determine appropriate machine spindle speeds or estimated attachment cycle times. The rolling time formula is as follows:
Machine spindle speed (in RPM) / 60 = Rolling time (in seconds)
or
Recommended part revolutions / Machine spindle speed = Rolling time
Find Your Thread Roll
You can find more data about penetration rates?and additional thread roll information in our?Guide to Thread Rolling Solutions.?
About the Author
Lib Pietrantoni
Lib has been with the Brinkman International Group, Inc. for the last 30 years. Currently the Director of Global Sales, Lib has held numerous positions in Engineering, Operations, Sales and Product Management with CJWinter and its manufacturing divisions. Lib is a member and has served on governing boards for the Society of Automotive Engineers, The American Society of Mechanical Engineers, and Precision Machine Products Association.