CLEAN ROOMS INTERNATIONAL的动态

Cut Costs and Reduce Downtime! - A Smart Move for Your Bottom Line! If you're currently using Impressed Current Anti-fouling (ICAF) systems to protect your box coolers, consider making the switch to Sonihull Ultrasonic Antifouling systems. You could save up to 90% on capital and maintenance costs! Remember, when your vessel is off-duty - whether due to reduced demand or lockdown restrictions, it’s still vulnerable to biofouling while at anchor. Traditional coatings don’t work when stationary, and ICAF systems only function effectively when the main systems are running. By installing a Sonihull system, you can protect idle systems from biofouling, avoiding the need for costly drydocking before returning to service. Let’s make smart choices for efficiency and savings! Contact: https://lnkd.in/essKA9-H #shipsandshipping #costsavings #sonihull #vesselmaintenance

If moisture penetrates cleanroom insulation material it can cause an increase in the thermal conductivity of the insulation which reduces its effectiveness. The closed cell foam material used in T-FIT? Clean means that it's inherently hydrophobic (and therefore doesn't need any outer cladding to prevent moisture/water penetration). The longevity of traditional open cell insulation is dependent on the continuity of often thin flimsy, poorly fitted outer coverings that easily allow moisture to penetrate the insulation, with the resulting loss of performance. We tested how moisture impacts thermal conductivity in open cell insulation material - melamine foam - versus TFIT Clean. The results clearly showed how resilient TFIT Clean insulation is to moisture absorption, maintaining its performance levels and increasing its longevity. Find out more in the application profile below... #TFITClean #Cleanroom #Cleanrooms

BFM makes your plant safer and cleaner. Here’s a BFM case study for the pigment- and paint industry.

#AmpcoPumps brings you the SLH-5G from #ITTBornemann, the next generation in sanitary #TwinScrew technology that features 35% more displacement and a PATENTED maintenance design second to none. The SLH-5G is EHEDG, 3-A and FDA certified and backed by Ampco Pumps superior #CustomerService. Experience this true dual-duty #PositiveDisplacementPump that can handle process and CIP applications. ADVANTAGES: > 35% more displacement > PATENTED maintenance-friendly features > Built-in gear lock for faster screw changes with the pump in place > Easier to change seals > Backwards compatibility with previous model footprints > Reduced weight > Handles up to 60% entrained air > Multiple screw sizes available > Multiple screw pitch angles available > Helical gears > Hardened rotors Learn more about the most #MaintenanceFriendly, #HighPerforming twin screw in the industry: https://lnkd.in/geFCp7xx #pump #twinscrewpumps #AmpcoPumpsAdvantage #krones #solutionsbeyondtomorrow #foodandbeverage#foodprocessing #pumps

Watch the video and learn how to avoid costly downtime!

Here's another plant that saw immediate change from using the BFM? fitting system. THE PROBLEM: ??Super fine pigment powder leaking from sieve connections causing safety & hygiene concerns ??Difficult removal and replacement when cleaning, causing unnecessary downtime THE BFM? SOLUTION: Installed BLUEBAND? flexible connectors on all connection points THE BFM? RESULTS: ??A 100% sealed system, so no more powder leaking throughout plant. ??Fast and easy snap-fit makes removing & refitting for cleaning a breeze. Need more proof? See how manufacturers the world over have solved their problems with the BFM? fitting system. https://hubs.ly/Q02TLF-y0 #BFMfitting #powderprocessing #industrialsafety #explosionrisk

In Episode 4 of Tim’s Tech Tips, PMC Technical Services Manager Tim Newmeyer shows you the correct way to safely remove the pump from the PMC PH-2 low-pressure spray foam proportioner and replace the pump seal. Watch the video and learn how to avoid costly downtime: https://lnkd.in/eNY24cUZ #pmc #sprayfoamequipment #timstechtips

In Episode 4 of Tim’s Tech Tips, PMC Technical Services Manager Tim Newmeyer shows you how to remove the PH-2 spray foam proportioner pump and replace the seal within the pump. Watch the video to learn how to complete this process correctly and safely to minimize downtime: https://lnkd.in/eNY24cUZ #pmc #sprayfoamequipment #timstechtips

Euronda Pro System thermodisinfection becomes XL! ? Spacious: it fits up to four complete loads of a 24-litre autoclave ? Powerful: double wash pump with separate circuits ensuring a high water flow and pressure on both levels, while two independent arms guarantee capillary action. ? Effective: the forced and filtered hot air system ensures complete internal and external drying. https://lnkd.in/dNkvj_d6

Interesting study from Medline Scientific highlighting the many benefits of using Aluminium ULT freezer racking.