How to add hydroxyethyl cellulose to paint

Hydroxyethyl Cellulose (HEC) is an important cellulose derivative, commonly used in the paint industry as a thickener, stabilizer and rheology modifier. It can improve the fluidity and stability of the paint and enhance its film-forming properties.

1. Properties and functions of hydroxyethyl cellulose

1.1 Basic properties

Hydroxyethyl cellulose is a water-soluble nonionic polymer made by introducing hydroxyethyl groups into cellulose. Its characteristics include:

Water solubility: easily soluble in water to form a transparent to milky white solution.

Viscosity control: The viscosity of the solution can be controlled by adjusting its concentration.

pH stability: Stable over a wide pH range.

Biodegradability: Environmentally friendly.

1.2 Functions

In paint, the main functions of hydroxyethyl cellulose include:

Thickening: Increase the viscosity of the paint, enhance its suspension and fluidity.

Stabilization: Prevent pigment sedimentation and improve storage stability.

Rheology regulation: Improve the rheological properties of the paint and control the fluidity and leveling of the paint during construction.

2. Steps for adding hydroxyethyl cellulose

2.1 Preparation

In coating production, the following preparations are required for adding hydroxyethyl cellulose:

Raw material preparation: Select the appropriate type and specification of hydroxyethyl cellulose (such as different degrees of substitution and viscosity grades).

Dissolving medium: Prepare the medium for dissolving hydroxyethyl cellulose, usually water or an aqueous solution.

2.2 Dissolving process

Dispersion: Slowly sprinkle the hydroxyethyl cellulose into the stirring cold water. To avoid agglomeration, the cellulose can be premixed with a certain amount of glycerol or other anti-caking agent.

Stirring: Keep stirring to promote the dispersion of cellulose in water. The stirring speed should be fast enough to avoid the formation of lumps, but not too high to avoid introducing too much air.

Swelling: Allow the cellulose to swell fully in the water. It usually takes 30 minutes to several hours, depending on the type and specification of cellulose.

Heating (optional): For some cellulose varieties, the water can be heated moderately (usually not more than 50°C) to speed up the dissolution process.

Dissolving: Continue stirring until the cellulose is completely dissolved and a uniform solution is formed. The dissolved solution should be transparent or translucent, without obvious particles or undissolved cellulose.

2.3 Add to the coating

Pre-mixed solution preparation: Hydroxyethyl cellulose is usually dissolved and prepared into a pre-mixed solution, which is then added to the coating. This ensures that the cellulose is evenly distributed in the coating.

Gradual addition: Slowly add the hydroxyethyl cellulose pre-mixed solution to the stirring coating base. Keep stirring evenly to prevent the formation of clots.

Mixing: Continue stirring during the entire addition process and after the addition to ensure that the cellulose is evenly distributed in the coating.

Testing and adjustment: Test the viscosity, fluidity and other key properties of the coating, and adjust the amount of cellulose or the proportion of other components of the coating if necessary to achieve the expected coating performance.

3. Precautions

3.1 Prevent caking

Sprinkling speed: Sprinkle hydroxyethyl cellulose slowly to avoid excessive addition at one time.

Stirring: Maintain a moderate stirring speed to avoid caking.

3.2 Temperature control

Avoid high temperature: High temperature may cause degradation of hydroxyethyl cellulose, usually controlled below 50°C.

Moderate heating: Moderate heating can speed up dissolution, but pay attention to temperature control.

3.3 pH control

Neutral environment: Hydroxyethyl cellulose is more stable in a neutral or slightly alkaline environment, and extreme pH may affect its stability and performance.

3.4 Solution storage

Prevent bacterial contamination: The solution is easily invaded by microorganisms and needs to be added with preservatives or stored at low temperatures.

Shelf life: It is recommended to use it as soon as possible after preparation to ensure optimal performance.

4. Application cases

4.1 Interior wall paint

In interior wall latex paint, hydroxyethyl cellulose can provide a good thickening effect, improve the construction performance and film-forming quality of the paint.

4.2 Exterior wall paint

In exterior wall paint, adding hydroxyethyl cellulose can improve the weather resistance and leveling of the paint, and help the uniform coating and durability of the coating.

4.3 Water-based wood paint

In water-based wood paint, hydroxyethyl cellulose can provide a smooth feel and good gloss, and improve the transparency and hardness of the coating.

As a thickener and rheology modifier in coatings, hydroxyethyl cellulose has a significant performance improvement effect. During the addition process, attention should be paid to its solubility, addition order and environmental conditions to avoid agglomeration and degradation. In practical applications, the quality and performance of coatings can be effectively improved through reasonable proportions and usage methods.