Highly reliable DC/DC converter for axle counters beside the rail tracks
Special solution for a customer to be used beside the rail tracks. The electrically isolated DC/DC converter supplies a safety application which energizes the axle counters and accordingly controls rail traffic areas.
Modified solution from Autronic:
The original solutions with 24 VDC and 60 VDCin are replaced with a single DC/DC converter. The wide input range between 14.4 and 84 VDC helps to reduce the customer’s variety of models. Integrated is an active reverse-polarity protection, an active inrush current limitation as well as a hold up time of 10 ms.
The continuous power is 60 W, however, a double load of up to 5 sec. is possible without any restriction. The output voltage is 120 VDC, protection against overcurrent, overvoltage and over-temperature helps to protect the subsequent applications against overloads.
The 4TE converter has a continuous efficiency of over 84 % depending on the input voltage. Further characteristics of this superior converter are parallel connection with exact power distribution, redundancy operation, hot swap, surge-immune outputs, and a temperature range between -40 and 85 °C.
The plug-and-play solution supports the high EMC requirements for ISDN signals to secure an interference-free radio communication. This required switching frequencies of the converter steps of ?300 kHz at over 3000 VDC isolation.
High environmental requirements as well as an MTBF value of ?760,000 h according to MIL-HDBK-217-F round-off the pack.
Summary:
· Input: 24.4…84 VDC
· Output: 120 VDC
· Power: 60 W / 120 W (5 sec.)
· Temperature: EN 50155 – Class OT 4 ST1/2
· Isolation I/O: 3250 VDC
· Hold up time: 10 ms
Features: reverse polarity protection and inrush current limitation (active), parallel mode, hot swap, redundancy operation, protection against excess current, overvoltage and high temperature
Standards: EN 50155, EN 50121-3-2, EN 50121-1 and -4, EN 50125-1 and -3, EN 61373, EN 45545-2