High Frequency PCB Built on 30mil RO4350B With Immersion Gold
Product profile
1.1 General description
This is a type of 2 layer PCB built on 30mil RO4350B substrate with Tg 280°C for the application of Splitter HDMI. It's 0.8 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and immersion gold on pads. The base material is from Rogers supplying single up PCB. They're fabricated per IPC 6012 Class 2 using supplied Gerber data. Each 50 boards are packed for shipment.
1.2 Features and benifits
- Excellent high frequency performance due to low dielectric tolerance and loss.
- Delamination of copper foil will not be caused by the change of cold and heat due to the consistency with the thermal expansion coefficient of copper foil.
- The characteristic of low dielectric loss makes the signal loss at a lower level, which makes the signal transmission of the whole equipment excellent.
- ENIG has good oxidation resistance and good heat dissipation.
- DDU Door to door shipment with competitive shipping cost,Whole fabrication process are totally controlled.
- Fast and flexible to save the time of production from prototype to standard production
- Small quantity order is accepted
- UL recognized and RoHS Directive-compliant
1.3 Application
Mixer,Radar sensors,RF Switches,Automatic gate induction, Antenna combiner, Transmitter combiner
1.4 Parameter and data sheet
Have a Nice Weekend!!
To valued clients:
Order from Feb. 1st will be sent after CNY.
Bicheng closes for Chinese New Year from Feb.11th, back on Feb. 21st