Have you noticed the red and yellow dots on the car tires? After knowing the use, the tire can be used for 2 years.

Have you noticed the red and yellow dots on the car tires? After knowing the use, the tire can last for 2 years! In our lives, there are actually many people who drive, but there is no special understanding of the basic information on the vehicle. For example, in the case of tires, many people can clearly see the tires. The size and signal of the brand specifications, etc., then the car tires are also the one that touches the ground most, so there are also many small secrets that can be brought with them, which are not well understood by many car owners, such as tires. Friends who have a lot of yellow and red on the top will feel very strange. In fact, their role is also very large. So what is the use of the two points of yellow and red on the car tires? Let's take a look.

When we bought a new car, few people noticed this on the tires, and even when the tires were changed, they didn’t find them. So, the car owners who know the usual care will know the master. When the wheel is changed, the wheel will not be turned over again, so that it is to find the point on the tire, and then put the tire on it again, because each wheel also has its own pattern. . And installation direction. If you make a mistake, it will be very troublesome.

In fact, the red dot is the position where the longitudinal rigidity of the tire is the largest, which means that the tire has a maximum amount of vibration when the tire rotates one turn, and if the vibration value is too large, the tire vibration red heart yellow dot is also called It is a classic mark, which means that the part is also the lightest place on the tire. Then everyone knows that the car tire is actually a tire wheel and valve with three parts. Because the wheel has to grow into the door, the wheel also has the position of the valve, and it is the heaviest point on the whole circumference of the wheel, and the heaviest point on the wheel is the lightest point on the tire. That is to say, it is a hollow yellow dot, which plays a complementary role, so that the tires will be balanced.

Then when changing the tires, it is necessary to look at the valve's valve for correcting the yellow point. Only the symptomatic one is the tire with good quality and no deviation, and only the tire with the valve to correct the yellow point can be activated. In the balance, the amount of the middle block is reduced. Another point is that the yellow point can also be used as a sign when the tire is installed, so as to avoid the situation of the tire being reversed. In fact, in addition to the two points on the tire, the part of the wheel There is also a mark on the mark. If it is, then it is a white solid point. Of course, some people have no mark on it. This white is the classic and the light point of the wheel, and this position is also the lightest. 

Knowing the meaning of these points, then the friends already know how the tires should be installed, and also need to pay attention to these points during the tire installation process. First, the side of the mark is outward. If there is a white punctuation on the tire, the red dot on the tire should be aligned with the white point on the hub. If there is no mark on the tire, the yellow point and the valve on the tire should be Don't forget, the entrance water also has weight. The purpose of the last two points is to combine the key points with the classics and let them complement each other. Then let the whole wheel reach a balance point as much as possible. I would like to share with you the role of red and yellow dots on the tires. I wonder if you have noticed such a problem?