H-Lift Universal Lifting Clamp

A universal lifting clamp is a specialized tool designed for vertical lifting, transporting, and turning of steel plates and structures from various positions.

H-Lift Universal Lifting Clamp, ULC-A type features:

For vertical lifting, transporting and turning of all steel plates and structures from all positions.

Min. WLL is 10% of max. WLL. With articulated lifting shackle for universal lifting flexibility at various angles.

The articulated lifting shackle guarantees a pressure grip in every position, even when side loading up to 90 degrees.

When lifting in an angle higher than 45 degrees. Please check the WLL reduction below.

Longer plates can be lifted without the use of a spreader beam when using two clamps on a two legged chain sling.

Always equipped with a safety mechanism, ensuring the clamp does not slip when vertical lifting force is applied and when load is being lowered.

Clamp is locked in closed as well as open position.

Lightweight, maintenance-friendly, heavy duty body.

These clamps are only suitable for lifting single plates with a surface hardness below 30 Rockwell C (HRC)