GLASS EDGEWORK

GLASS WITHOUT EDGEWORK

When your order the raw glass sheet for your mirrors, tabletops, shelves, glass showers and etc. You can specify the type of edgework you like to use for the glass so that we will not be hurt with the sharpe edge of the raw glass. Here are some edges and corners, and we would like to share you with their differences and usage:?

Grinding VS Polished:

-GRINDING also referred to the raw grinding edge, edgework with a semi-satin finish. Its surface is not luster and looks whiter than the polished edge. This type of glass edging is mainly employed to ensure the finished glass is secured for handling. It is the most practical edge but it is only suggested if the edges will be completely covered.

-POLISHED edge is similar to grinding but it is with additional processing with luster to the ground finish. It looks very shiny and offers a refined glossy finish. It is efficient and is the perfect way to demonstrate the thickness of the glass.

-Seamed edge： also named standard sanded edge, no remaining sharp edge that does not hurt people. A seamed edge can often have small defects along the edge, which does not affect safety but?it is not a smooth cosmetically finished edge.?Seamed edges are normally the cheapest option. So, if you are looking for a safe and cheap option, the seamed edges are the most helpful.

APPLICATION:

- Framed Glass Walls & Partitions

-Any Non-Decorative Solution

-Low-traffic Areas

And etc

-Flat polished edge: edge work with smooth shiny finish which is highly visible. Polish the edges give the glass a nice sheen finish, is used for a complete, finished look suitable for display purpose. Arisen bevels can be groud or polished.?

APPLICATION:

?

-Mirrors

-Round glass table top

-Glass shelf

-Glass dividers & Partitions

-Decorative Furniture

And etc

-Pencil Polish Edge(C-shape edge)： the side edge is rounded with a soft look (shiny finish), this rounded edge gets its name simply because of its pencil-like shape. The glossy finish is best for the furniture pieces and the edge allows the glass to fit adequately in the furniture.

APPLICATION:

-Light surfaces

-Mirrors

-Round glass tabletop

-Glass corner shelf

-Decorative Glass furniture

And etc

-Beveled Polish edge(cut and swipe edge) the edge of the glass are cut polished at an angle to produce a look, and he involves removing sharp edges with a sanding belt. This process will result the edge of the glass will be thinner and the center of the glass being thicker. The bevel side of the range from 1''to 1-3/4’’

?

APPLICATION:

?

-Mirrors

-Other Decorative Glass Solutions

Any other questions, please feel free to contact us:

Email: [email protected]

Wechat/Whatsapp: +86 15610010953