GEENO Paint Bucket Mold
GEENO MOULD CO ., LTD
-Quality ，Promise，Sincerity - Focus on providing the most suitable one-stop plastic injection solution .
As a professional plastic paint bucket mold manufacturer, how to achieve high quality, high efficiency, and high life of the paint bucket mold, to create more profits for users?
We're from the mold design for you to answer.
First of all, the mold should be designed strong, because the paint bucket mold is a deep cavity mold. The plastic melting index is relatively low, (need to use MFI8 or even below the plastic), so the pressure is relatively large when forming if the mold is not strong enough, the life is short. GEENO will choose P20, 718H, H13, DIN1.2316, and other steel materials according to the actual production requirements.
In addition, the paint bucket is made of plastic with relatively low MFI, and the gate should be large to increase the flow rate, otherwise, it is difficult to form. Gino adopts a needle valve hot runner system to increase the flow rate and facilitate better forming of the paint drum. And the needle valve hot runner can be synchronized with the Injection molding machine pre-plastic, shortening the cycle.
More output at the same time is a very good choice to increase profits, so it is necessary to shorten the mold-forming cycle. Gino added beryllium copper inserts to the mold at various points to reduce cycle time.
1. The design of beryllium copper + cooling rod along the mouth greatly improves the cooling along the mouth and prolongs the production cycle
领英推荐
2. The head top is inset with beryllium copper to help the sprue area near the rapid cooling (the sprue area near because of the heat flow
The road causes a large temperature, the conventional steel material is difficult to cool, and the mold cycle is long)
3, the mold water diameter design is larger, the number of ways is increased, but the machine processing accuracy is higher, the processing time is longer, and the cost will increase accordingly.
GEENO MOULD has done paint bucket mold from 1L, 3.6L, 18L to 20L have corresponding mature cases, if you are still looking for a reliable paint bucket mold manufacturer, GEENO will be your ideal partner.