Gear Up #7: Calculate interference fits for free with mechanicus – anywhere, anytime!

Calculation of interference fits according to DIN 7190: determine the excess and load capacity anytime and anywhere!

With this mechanicus calculation feature, you can flexibly and precisely optimize your cylindrical interference fits according to DIN 7190?– from any internet-enabled device. Calculate the required excess, the load capacity, and the slip resistance of the interference fit based on your load requirements.

?? Get started for free

How it works:

1. Calculation selection: Specify the parameters you will provide and which should be calculated.
2. Geometry and material: Enter the dimensions, operating data, and material properties for the shaft and hub.
3. Calculation: Start the calculation and get detailed results right away.
4. Additional details: Consider the influence of centrifugal force and temperature, if necessary.

www.mechanicus.app

Seminars in September and October, 2024

Plastic gears: design - production - operation?(online)

24 & 25 September, 2024

Prof. Dr.-Ing. Jens Bihr, Ulm University of Applied Sciences

OPC UA for developers (2-part)

26 September, 2024 (online) & 9 October, 2024 (Frankfurt, Germany)

Sebastian Friedl, interop4X/FVA GmbH

Basics of planetary gear drives (online)

2 October, 2024

Prof. Dr.-Ing. Andreas Doleschel, Rosenheim University of Applied Sciences

Bolted joints?(online)

10 October, 2024

Prof. Dr.-Ing. Jens Bihr, Ulm University of Applied Sciences

Battery management systems (BMS) and condition monitoring (online)

15 October, 2024

Waleri Milde, Fraunhofer Institute for Solar Energy Systems

Analysis of the load capacity limits for pitting and wear in worm gearboxes to reduce test durations?(free online seminar!)

24 October, 2024

Luis Haug, Technical University of Munich

All upcoming seminars

SiME Congress | 19 and 20 September, 2024 in Garching near Munich

The Sensor-integrating Machine Elements Congress (SiME) is coming up soon. This is an exciting opportunity to discuss the latest developments in digitalization and the use of sensor-integrated machine elements with leading experts. Use the breaks to gain exclusive insights into SPP demonstrators and network with exhibitors. Complete your visit to the congress with a tour of the institute.

Register

Aachen Conference on Gear Production | 06 and 07 November, 2024 in Aachen

Increasing load capacity, operational safety, noise behavior, and resource efficiency requirements pose challenges for the drive technology industry. These topics will be discussed at the Aachen Conference on Gear Production (ACGP).Join us on 06 - 07 November, 2024 in Aachen and immerse yourself in the latest innovations in gear technology.

Register

nextlub | 22 and 23?January, 2025 in Leipzig

The 2025 nextlub conference will focus on sustainability in the lubricant industry and tribology research. nextlub will bring together specialists from science and industry as well as tribology and lubrication experts to promote the discussion on the latest ideas, concepts, developments,and innovative solutions.

Register

If you have any questions or requests, we are here to help. Get in touch by phone, e-mail, or using the contact form on our website.

More information on these and related topics can be found on our website www.fva-service.de.