Galvanised Mezzanine Goods Lift

Galvanised Mezzanine Goods Lift 500 kg capacity recessed into floor (pit by others). Platform size Overall Width 2000mm Depth 1800mm (useable depth 1600mm) Rise 4570mm 2 stops. Controls Low voltage ‘Press to go’ push buttons fitted with key lock and emergency stop at each level. Electrics 3 phase, 415v, 50Hz, 3Kw. Lift speed upgraded 15cm per second. Shot Bolts are fitted as standard; these lock the platform in the raised position making it safe for personnel to walk on. Galvanised support structure a fully supporting lift structure, manufactured from box section steel without infill sides and side-hinged loading gates at lower level, height 2200mm at lower level. The gates are fitted with a heavy duty interfaced lock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if a loading gate on any level is not fully closed. Upper level guarding increased to 2200mm. Lift supplied with Load Indication - Slow down switch fitted (for soft landing) Manual lowering in event of power failure, 1 off lift prop - required during lift inspections and routine maintenance, Electrical isolation matting in lift control area. Safety In compliance with E.C rules (Machinery Directive 2006/42/EC) For a quotation please contact Manual Handling Solutions Tel 01553811977

https://goodslift.website/galvanised-goods-lift-installed-bracknell-berkshire/