Functionality of a Control Valve

Functionality of a Control Valve

Rinoj Rajan, L6σBB,MEngNZ,MIEAust,MIET, MIIRSM, MIMMM, PCQI, PMP?, RMP? Rinoj Rajan, L6σBB,MEngNZ,MIEAust,MIET, MIIRSM, MIMMM, PCQI, PMP?, RMP?

Rinoj Rajan, L6σBB,MEngNZ,MIEAust,MIET, MIIRSM, MIMMM, PCQI, PMP?, RMP?

Mechanical Engineer ?? Strategic Quality & Project Leader ?? QHSE ? Inspection ? Expediting ? Project MGMT. ??? CSWIP 3.2 ??? BGAS Grade 2 ??? FROSIO Level III (Coating) ??? Lead Auditor - API & ISO (QMS ? EMS ? OHSMS)

发布日期: 2024年12月20日
+ 关注

Article No.81

A control valve regulates fluid flow within a process system by using a positioner and an actuator, allowing for precise control based on an external control signal.

Key Components:

  1. Control Valve: The valve itself, which can be a globe, ball, or butterfly valve. that adjusts fluid flow based on its opening position.
  2. Actuator: Converts the control signal into mechanical movement to set the valve's position. Pneumatic Actuator: Uses compressed air to move a diaphragm or piston linked to the valve stem.
  3. Positioner: Ensures accurate valve positioning by receiving feedback from the valve and making corrective adjustments to the actuator.

Working Principle:

  • Control Signal Input: A control system (e. g. PLC. DCS) sends a control signal (4-20 mA) to the positioner.

- 4 mA (or 3 psi): Valve fully closed (0% open).

- 20 mA (or 15 psi): Valve fully open (100% open).

- Intermediate values set the valve to specific opening percentages (e. g.. 12 mA 50% open).

  • Positioner Functionality: The positioner compares the control signal with the actual valve position (from a feedback sensor). If there is a discrepancy, it adjusts the actuator to achieve the correct position, often using PID control for smooth and precise positioning.
  • Actuator Movement: The positioner's commands move the actuator, which adjusts the valve stem and thereby the valve plug or disc:

领英推荐

- For Pneumatic Actuators: Air pressure moves a diaphragm or piston. adjusting the stem.

  • Feedback Control Loop: The control system continuously monitors the process variable (e. g., flow rate or pressure). If deviations occur, a new control signal is sent to the positioner. which readjusts the actuator and valve to maintain the desired setpoint.

Conclusion

The control valve system operates in a closed-loop manner, using a positioner for accurate valve positioning based on control signals. The actuator translates this signal into mechanical movement, adjusting the valve's opening to regulate fluid flow. This coordinated operation ensures optimal performance in industrial processes by maintaining the target operational parameters.

====================================================================

?? Consider following me at Rinoj Rajan, L6σBB,MEngNZ,MIEAust,MIET, MIIRSM, MIMMM, PCQI, PMP?, RMP? , B.E.(Mech), LSSBB, CSWIP 3.2, FROSIO (Coating), API Lead Auditor, ISO Lead Auditor (QMS, EMS, OHSAS, FSMS); if you like what I discuss and share here, this means a lot to me.

Follow our LinkedIn Page QUALITY MANAGEMENT PROFESSIONALS for Career Development Related Documents / Articles https://www.dhirubhai.net/company/qmsprofessionals

Join our Whatsapp Group for Technical Discussions / Standards / Specifications / Procedures https://chat.whatsapp.com/FrZtq1BMRsn7p6pvwP1KoX

====================================================================

要查看或添加评论，请登录

Rinoj Rajan, L6σBB,MEngNZ,MIEAust,MIET, MIIRSM, MIMMM, PCQI, PMP?, RMP?的更多文章

  • Cathodic Protection (CP):
    2025年2月4日

    Cathodic Protection (CP):

    It is an electrochemical technique used to prevent the corrosion of metal surfaces by making them the cathode of an…

  • Understanding Charpy Impact Test Temperature Reduction Below MDMT
    2025年2月3日

    Understanding Charpy Impact Test Temperature Reduction Below MDMT

    As per ASME Section VIII, Div. 1, Table UG-84.

  • Flange Management
    2025年2月3日

    Flange Management

    ?????????????????? ???? ?????????????? is crucial during shutdowns and startups, corrosion, dents and cracks often…

  • Difference Between NCR and SOR
    2025年2月3日

    Difference Between NCR and SOR

    Maintaining quality NCR and SOR are the main key tools. NCR (Non-Conformance Report) and SOR (Site Observation Report).

  • Pipe Material Glossary
    2025年1月28日

    Pipe Material Glossary

    Description of Pipes, Pipe Fittings & Flanges API: Americal Petroleum Institute ASME: American Society of Mechanical…

  • Material Properties
    2025年1月7日

    Material Properties

    Tensile Strength: Maximum stress withstood by material. Formula: σ = F/A Compressive Strength: Material's ability to…

  • Avoid These 5 Mistakes in Vendor Inspection
    2025年1月7日

    Avoid These 5 Mistakes in Vendor Inspection

    Vendor inspections are critical for ensuring quality, safety, and compliance in industries like oil and gas. However…

  • Choosing the Right Tank Roof
    2025年1月7日

    Choosing the Right Tank Roof

    Selecting the appropriate roof type for storage tanks is a critical decision influenced by operational, environmental…

  • Post Weld Heat Treatment (PWHT)
    2025年1月7日

    Post Weld Heat Treatment (PWHT)

    The Key to Reliable Welds PWHT is a vital step in welding that ensures durability and safety. By carefully heating…

  • Understanding the Quenching Process in Heat Treatment
    2025年1月7日

    Understanding the Quenching Process in Heat Treatment

    Quenching is a vital process in heat treatment, playing a critical role in enhancing the mechanical properties of…

社区洞察

其他会员也浏览了