Function introduction of ONU

Function introduction of ONU

Select to receive the broadcast data sent by OLT;

Respond to ranging and power control commands sent by OLT; And make corresponding adjustments;

Cache the user's Ethernet data and send it in the uplink direction in the transmission window allocated by OLT;

Fully comply with IEEE 802.3/802.3ah;

·The receiving sensitivity is up to -25.5dbm;

·Transmission power up to - 1 to + 4dbm;

·The PON is connected to the OLT using a single fiber, and then the OLT is connected to the ONU. ONU provides data, IPTV (i.e. interactive network TV), voice (using IAD, i.e. integrated access device) and other services to truly realize the "triple play" application;

·Maximum rate PON: uplink and downlink symmetrical 10Gb / s data, VOIP voice and IP video services;

·ONU "plug and play" based on automatic discovery and configuration;

·Advanced quality of service (QoS) function based on service level agreement (SLA) billing;

·Rich and powerful OAM functions support remote management capabilities;

·High sensitivity optical reception and low input optical power consumption;

·Support dying gasp function;

要查看或添加评论,请登录

Jack Cao的更多文章

  • What are the daily maintenance and precautions for optical fiber?

    What are the daily maintenance and precautions for optical fiber?

    1. When using the optical fiber cable, be sure to wipe the upper and both sides of the cable with alcohol and absorbent…

  • How to connect the broken optical fiber cable?

    How to connect the broken optical fiber cable?

    If the optical fiber cable is broken at home, you can replace it with another optical fiber cable, or use a special…

  • NL port and FL port

    NL port and FL port

    When the fibre channel loop is added to the fibre channel network, communication between the N-port port node and the…

  • Cables and media

    Cables and media

    ① Copper core wire The advantage of copper core is that it is the cheapest medium to connect San components. The copper…

  • Classification of optical fiber transceivers

    Classification of optical fiber transceivers

    With the diversified development of optical fiber transceiver products, its classification methods are different, but…

  • Optical transceiver selection products

    Optical transceiver selection products

    In the design of Ethernet optical transceiver, the selection of components plays an important role, which determines…

  • St connector

    St connector

    St connector St, perhaps the most common connection device in multi-mode networks (such as most buildings or campus…

  • Introduction to various optical fiber interface types

    Introduction to various optical fiber interface types

    FC round with thread (most used on distribution frame) St clip on round type SC snap on square (most used on routers…

  • Preparation of optical fiber fusion end face

    Preparation of optical fiber fusion end face

    To peel off the coating layer of optical fiber, it is necessary to master the "flat, stable and fast" peeling method…

  • Optical fiber fusion

    Optical fiber fusion

    Operators shall be specially trained to master the action essentials and operation specifications. First, clean the…

社区洞察

其他会员也浏览了