Fully Automatic Wire Cutting and Stripping Machine: Wire Stripping Depth Adjustment Methods

I. Adjustment of Stripping Depth Stripping depth is one of the most critical parameters in fully automatic wire cutting and stripping machines, directly affecting the quality of stripping. Therefore, it needs to be adjusted when stripping wires.

Manual Adjustment: The stripping depth adjustment device on the wire stripping machine usually has symbols indicating ” +” and “-” to respectively represent deepening and shallowing of the stripping depth. Adjustments should be made according to different wire diameters and materials to achieve the optimal stripping depth. Automatic Adjustment: Most modern fully automatic wire cutting and stripping machines are equipped with automatic adjustment functions. When the machine detects changes in wire diameter or material, it automatically adjusts the stripping depth to ensure stable stripping quality.

II. Control of Stripping Speed Stripping speed is also a factor affecting stripping quality. Faster stripping speed may result in uneven stripping and irregular cracks, while slower stripping speed may reduce stripping efficiency. Control of stripping speed can be achieved by adjusting the speed controller on the wire stripping machine. Generally, the appropriate stripping speed should be selected based on wire diameter and material, followed by proper adjustment to achieve the best stripping results.

III. Replacement of Stripping Blades Stripping blades are one of the most vulnerable parts of wire stripping machines, and their wear directly affects stripping quality. Therefore, it is necessary to replace the stripping blades regularly to ensure effective stripping. The method of replacing stripping blades generally involves the following steps:

Turn off the power and unplug the power plug after the wire stripping machine stops automatically. Use a wrench to loosen the fixing screws of the stripping blades. Remove the old stripping blades and install the new ones. Use a wrench to tighten the fixing screws of the stripping blades. Plug in the power plug, restart the wire stripping machine, and conduct stripping tests.

[Conclusion]

By mastering the wire stripping depth adjustment methods of fully automatic wire cutting and stripping machines through the above methods, you can better use and maintain the wire stripping machine, thereby improving work efficiency and stripping quality. It is worth noting that there may be some differences in wire stripping machines from different manufacturers and models, so careful reading of the instruction manual is necessary to avoid incorrect operations.