Full Automatic 1200x2800 Corrugated Carton Box Printer Slotter Die Cutter And Folder Gluer In Line From yike group

Characteristics:

The biggest characteristic of the Flexo Printer Slotter Folder Gluer Inline (FFG Inline) is high production efficiency, high per capita output value, low labor intensity and low labor cost. It is a common equipment in foreign countries, suitable for producing large quantities of orders, and 2-3 people can complete the entire carton production task. If the factory has a fully automated logistics system, the equipment can be used to maximum efficiency. The intelligent aspects of the printing press are mainly reflected in the daily work, such as hanging the plate, changing the mold using the fast automatic installation mode will greatly reduce the labor intensity.

Feeder UnitLead-edge Feeding System

• Lead-edge suction feeding system, easy operation, high accuracy,(adopts lead feeder system).?
• 7.5KW high pressure centrifugal fans, according to the cardboard?warping degree of frequency control pressure, to ensure warp?cardboard or thin cardboard high-speed accurate transmission.
• Left and right side baffle position electrically adjustable,?screw-driven.and can remember by computer.
• Front baffle adjust the position of the upper and lower intervals?synchronization by manual.
• Skip-feeding devices, could select skip-feeding according to needs. To ensure that large-scale cardboard can also be processed.
• Install 7" touch screen, could automatically display the?production quantity, production speed, and set the production quantity and every operating.

PRINTER UNIT?Printing Roller

• With printing plate, outer diameter φ450mm
• High quality steel production, surface grinded, hard chromium-plated. Static balance adjustment, stable operation, suitable for high speed running
• Roller horizontal direction and circumferential direction with datum line, convenient for align plate
• Fixed coil axis, suitable for standard hanging slats, realize rapid change plate
• Electric 360° adjust printing roller, automatic digital display adjustment, remember store digital.
• Installed with foot switch to control plate roller reversing, convenient change plate
• Auto-zero function, order memory.
• Printing roller plate-change and fix-plate function.
• Printing roll axial is adjusted left and right by manual, maximum movement left and right 10mm,auto-zero instruction

Slotting Unit

• Single-axle double-knife slotter, use Internal tooth structure adjutment the height of box, So that oil does not easily contaminated cartons
• Computer auto control cardboard size by Linear guideway?
• 6 shaft with rubber pre-creasing line, creasing line, slotter line?
• The first pressure line round, after preloading cardboard not easily crush?
• The above press round Urethane appearance package, will not damage the cardboard
• The slotter knife stock use traverse mechanism, screw with linear guide, to move more flexible and precise
• Slotting phase and box height, computer and electric digital control
• Preload, creasing gap adjustment adopt computer and electric digital control
• The slotter knife stock gap adjustment adopt self-locking structure
• There's the elastic corner-cutting knife. Can cut three, five, cardboard without adjusted.
• Preload wheel, creas wheel, slot knife traverse position computer and electric digital control
• The slotter knife adopt Anti-knife manner
• Computer automatic arrange knife, can stockpile 999 memories

DIECUTTER Unit

• Rubber roller mechanical spiral commutation 40mm move about horizontal structure
• Die-cutter phase, computer and electric digital control
• Horizontal phase, computer and electric digital control, range ±5mm
• Rubber roller and die roller gap use computer and electric digital control
• Adjust the transfer roller use computer and electric digital control
• The rubber roller compensated by motor-driven,control the speed of thr rubber roller, range ±3mm
• Rubber roller hsiuping cutting structure, keep rubber surface roughness
• Stripping the belt longitudinal output?to easy clean waste paper.

Gluer line Unit

• Maxmum speed: 200m/min?
• Mechanical work speed: 150m/min.
• Vacuum transfer?
• Fully automatic adjustment?
• Control way: PLC program control.

Folding part

• The upper and down conveyor clamping the cardboard to move forward,the cardboard inlet interval, as well as upper and down conveyor interval all adjusted electrically.
• Paper entering section adopts spring pressure wheel to load cardboard, limit device is equipped in the pressure wheel, and the interval between the wheel and down conveyor can be adjusted independently, make sure high paper feeding precision.
• The frond have the fan dust removal device, on the paper feeding time ,remove the slotting waste paper.
• he middle part is equipped with secondary crease line with V?shape
• device ,?which can make sure the folding precision.
• The back part adopts vacuum suction belt to convey cardboard, in case the cardboard slide away and two folding parts are not joint together completely.
• The back part is equipped with down folding belt, which speed is faster than the upper folding belt, the friction of the down belt movement will offset the resistance produced by folding cardboard, to reduce problem that the two folding parts of the cardboard are not joint together completely.
• The back part adopts rounder tower forming folding method, make the cardboard folding precision well controlled and the forming carton box with good shape.?
• The crossbeam made by thick steel plate with good Stability, the
• movement of the crossbeam adjusted by electrically.