In the past, floors may have been considered a non-critical environmental surface. But the pandemic changed everyone’s perception of which surfaces are critical to keeping customers and employees safe. While regularly cleaning your facility’s floor is probably common practice, do you know the differences between cleaning and disinfecting? Here are some quick tips.
Floor cleaning?is the physical removal of soil, debris, and organic substances from a surface. Cleaning is an important step in the disinfection process. Auto-scrubbers can be used to perform this important task between disinfection processes while people are present since cleaning solution is applied to the floor and quickly removed to prevent slip-fall accidents.
Floor disinfecting?is the use of chemical solutions that eliminate pathogens and disease-causing microorganisms. These chemicals require a dwell time of up to 10 minutes (times vary) to do their job. This task is performed after cleaning and when an area can be closed off as the floor remains wet for at least the required dwell time.
- Before cleaning the floor, remove loose soil, debris and other substances.
- Use a floor scrubber to complete a thorough floor cleaning, which removes stubborn soils and organic materials that can be hospitable to microorganisms. Allow floors to completely dry before continuing.
- Always wear appropriate Personal Protective Equipment (PPE) when preparing and using a disinfectant solution.
- Prepare the disinfectant solution according to label directions. Carefully follow directions for use, including contact times, to ensure effectiveness.
- Always restrict foot traffic while treating areas and use appropriate safety protocols, such as placing barricades and using prominent safety signs, to avoid slip and fall accidents while floors remain wet.
- Apply the disinfectant with spray applicators, mops or auto-scrubbers operating in a mode that allows the solution to remain on the floor for the necessary dwell time. If using a Tennant auto-scrubber dryer.
- Set the auto-scrubber dryer to double-scrub by raising or removing the squeegee.
- Set solution flow on the lowest possible solution flow rate.
- Scrub at a rate to distribute disinfectant across the scrub path.
- Ensure the disinfectant remains in contact with the floor surface for the required time, allowing surfaces to air dry following application.
- Drain tanks of remaining disinfectant solution immediately after use. Rinse the floor machine with water using conventional scrubbing to remove any product residue inside and to reduce the potential for chemical interaction issues.
- Additional cleaning processes can be used between disinfection cycles to create a clean and safe environment for customers, guests and employees.
- Even when used as directed, using disinfectant in an auto-scrubber may cause premature wear and additional service calls as disinfectants can be more damaging than detergents.
- Using a disinfectant without adequate contact time on the surface creates a false sense of safety and wasted funds. Traditional use of auto-scrubber dryers put the solution down and recovers it in 2-3 seconds.?This is not long enough to achieve efficacy.
- Before selecting a cleaner or disinfectant, review labels to determine if the chemistry is compatible with your floor scrubber dryer’s surfaces and parts. Some disinfectants, just like some cleaning products, can corrode metals, plastics and types of rubber.
- Thoroughly clean all hard, non-porous surfaces of the machine. After cleaning, allow time for surfaces to completely air dry prior to disinfection.
- Thoroughly apply the disinfectant by wiping or spraying and carefully follow contact time and PPE instructions.
- If some surfaces cannot be reached via wipe or spray, it may be necessary to dissemble and immerse the parts in disinfectant.
- Wipe and rinse equipment with water to remove disinfectant residues from the machine, paying specific attention to the scrub deck, squeegees and other areas prone to chemical corrosion to reduce the potential for damage to your equipment. Take care not to spray the electrical components of the machine.
*Always read and follow the instructions for your brand of floor scrubber.
In the ever-evolving cleaning and disinfection landscape, it is crucial to stay informed and take the necessary steps to protect the well-being of your employees, visitors and customers. By understanding the differences between floor cleaning and disinfecting, you can enhance the safety of your facility and know when each is needed.
To further enhance your floor care knowledge and help you make informed decisions download our comprehensive whitepaper, "Choose the Right Partner." This valuable resource will provide you with insights and guidance on selecting the appropriate floor care manufacturing partner. Don't miss out on this opportunity to elevate your floor cleaning game and ensure maximum clean. Download our whitepaper today and take the first step towards a safer and healthier environment.
