FIBERSTAMP Will Present DWDM Optical Network Solutions At Fiber Connect 2024.
July 16, 2024. Singapore –?Fiber Connect 2024 will be held in Gaylord Opryland, Nashville, Tennessee, USA from July 28 to July 31. FIBERSTAMP will present DWDM optical network solutions and 800G AI data center solutions in the exhibition, and set sail to showcase our latest and most professional product range at Booth #1090!
Fiber Connect, sponsored by the Optical Fiber to the Home Committee of USA, is the most professional optical communication interconnection industry seminar & exhibition in USA, and is recognized by the industry as the most important exhibition and conference exchange platform for optical communication access networks in USA. During the exhibition, we will show you the DWDM DCI BOX optical network solutions for urban IDC interconnect, including Non-coherent DWDM subsystem and coherent DWDM subsystem, as well as non-coherent DWDM optical transceivers and coherent optical transceivers that can be widely used in such solutions.
Fiberstamp will DEMO the 400G DCI/1U 6.4T Coherent DCI BOX transmission device at the show. The system can use 400G QSFP-DD ZR+ and 400G CFP2 DCO coherent optical modules, with the newly developed 4x 400G QSFP-DD OEO service card, 1U single frame can support a maximum 6.4T broadband capacity. It is mainly used for the interconnection of data center rooms of operators and Internet companies, and can also be applied to the aggregation layer and access layer of long-distance networks of various transmission applications LAN/MAN.
The newly developed 400G QSFP-DD OEO card supports four 400G signal wavelength conversion and regeneration trunks. A single board supports a maximum of eight 400G QSFP-DD optical modules
In addition, we also have 2U DCI BOX available, which can support up to 12.8T broadband capacity
领英推荐
Fiberstamp 400G QSFP-DD ZR+ coherent optical transceivers, DWDM single wave 400G, Tx optical power support 0~-6dbm adjustable, support flexible grid and openZR+ protocol, use OFEC, The Rx OSNR provides 24db/0.1nm@400G 16QAM and 300km to 400km service interconnections. The typical power consumption is less than 22W.
Fiberstamp 100G QSFP28 DCO coherent optical transceivers, single-wave 100G DP-QPSK modulation mode, Tx optical power support -3~-10dbm adjustable, DWDM Full C-band tunable, 50GHz/100GHz grid, 100GE/OTU4, 120km service interconnection, typical power consumption is less than 8W.
In addition, we will also exhibit a series of AI supercomputing data center interconnection products, including silicon optical 800G silicon optical modules and 800G/400G PCC/ACC and AOC short-range data center interconnection products. All AI supercomputing data center interconnect products are available in both OSFP and QSFP-DD packages
For more product information, please visit booth #1090 and we will introduce more details to you!
About FIBERSTAMP
As an Open Optical Network Mail Carrier,?FIBERSTAMP is committed to providing global users with Economic, Professional and Efficient Open Optical Network Solutions. The current main products cover 25G/50G/100G/200G/400G optical transceiver modules, Active Optical Cables (AOCs) and Direct Attached Cables (DACs), 100G/200G/400G coherent optical modules and UHD video transmission products. Meanwhile, through long-term deep digging in new technology, FIBERSTAMP is rapidly evolving to the promising era of 800G and CPO based on Silicon Photonics! For more information, please visit www.fiberstamp.com or contact us by [email protected].