FFG Flexo Folder Gluer
Applications and Characters:
1.???Feeding Unit:
1)?????Sun Automation Lead Edge Feeder with strong vacuum transfer for precise and stable feeding.
2)?????Dust removal system with brush and segmented vacuum sheet cleaner.
3)?????Self-locked system adopted for adjusting feeding rolls gap. Motorized and PLC control of feeder side guides.
4)?????Main motor is protected from starting up when units are not fully closed and locked.
2.???Printing Unit with Vacuum Transferring：
1)?????Pneumatic clutch is adopted on the anilox roll to: (a) make the roll run at the same speed as the main motor when the unit is printing; (b) make the roll stop when the unit is not printing; (c) reduce the possibility of damage to the rubber roll and the anilox roll for improper operation; (d) allow units which are not in use to be washed up while running.
2)?????Transverse register is also digitally controlled by motor and PLC (±10mm).
3)?????Cleaning Function can be automatically switched to ensure the ink recycling thoroughly.
4)?????Automatic resetting after cleaning the printer.
5)?????Doctor-Blade Inking System (Optional).
3.???Slotting Unit:
1)?????An internal gear adjusts the height of the carton box and prevents the lubricating oil from spilling or leaking on to the paperboard.
2)?????Upper boss and lower boss are coupled to keep the two knives aligned while moving, which is helpful to prolong service life.
3)?????Slotting register and height of carton box are digitally controlled by motor and PLC.
4)?????Motorized controls of the slotting bosses caliber.
领英推荐
5)?????A protective device prevents the slotting knife from crashing when the height of the carton box is adjusted.
4.???Die Cutting Unit:
1)?????Side to side oscillation of anvil drum (50mm).
2)?????The die cut cylinder lateral register is digitally controlled by moto and PLC, rang about ±10mm.
3)?????Anvil rubber roller speed compensation adopted independent motor for driving to control the rubber roller speed, the compensation scope is ±3mm.
4)?????Anvil trimmer to keep surface of the anvil covers flat and smooth.
1.???Gluing Unit:
1)?????Through glue spraying system follow spraying automatic, no need contact with cardboard surface.
2)?????Spraying system can depend on customer demands, option VLACO, HHS, KQ.
2.???Folding Unit:
1)?????High rigidity beam, precise lateral moving system.
2)?????Precision deflection wheel system to ensure feeding register vacuum transportation when folding.
3.???Running Unit:
1)?????Running unit combined with lead screw and linear guide rail.
4.???Stacking Counting and Output Unit:
1)?????High accurate control stacker quantity.
2)?????Set quantity of cardboard, push out by air cylinder board.