Is there FEP grade for extrusion process?

The FEP/FEP46 is a kind of chemical material( a copolymerization of tetrafluoroethylene and hexafluoropropylene). It is a modified material of PTFE(polytetrafluoroethylene) which is popularly known as the King of Plastic due to its chemical stability, anti-corrosion, leakproofness, electrical insulating property and aging resistance.?

Property of FEP Particle

• Chemical inertness to a wide range of industrial chemicals and solvents.
• Low dielectric constant over a wide range of temperatures and frequencies.
• Nonignite and Stop flame spread.
• Excellent wear resistance and Low friction coefficient
• Good processing property of thermoplastics; welding-remoulding potential; extrudes in continuous lengths.
• Stress crack resistance.
• Non-stick characteristics.
• Good bio-compatibility.
• High purity grades and high clarity
• Good permeability resistance.

Usage of FEP Resin HD925/926

Extrusion Processing, Used for Wire Insulation Layer, FEP Tubes, Films and so on.

Quality Specification of FEP Particle HD925 HD926

• Appearance: Translucent Particle
• Melting Index:HD925: 6~8 g/10min, HD926: 8~12 g/10min
• Tensile Strength: HD925:More than 24 Mpa, HD926: More than 22 Mpa
• Elongation at Break: More than 300%
• Relative Gravity:2.14~2.17
• Melting Point: 270 around?℃
• Dielectric Constant 106HZ: Less than 2.15
• Dissipation Factor?106HZ: Less than 7.0x10-4
• Volatile: Less than 0.1%

Attention and Package

Attention:

The processing temperature should not exceed 420℃ to prevent toxic gas from releasing.

Package:

1. Packing in PE bag and outer is drum. Net weight is 25KG.

2. Onto dry in the warehouse. Storage warehouse and transportation process should keep clear auspicious, dry,presenting mixed impurity.