External Wear Liner Stops Spillage On Belt Feeders

Problem

At the Northern Indiana Public Service Company (NIPSCO) Michigan City Generating Plant, 5000 tons per day of PRB coal are metered via belt feeder onto conveyors and into the plant's ten bunkers. With surges of material as railcars unload, combined with the high head pressure from the hoppers, the belt feeders suffered extensive spillage . This spillage was compounded by the worn-out condition of the chutes. A conveyor fire—fortunately without serious damage, injury, or system outage—emphasized the problem and sent Michigan City plant personnel in search of a solution.

Solution

To upgrade its system and reduce spillage, NIPSCO Michigan City elected to install Martin Engineering External Wear Liner on the four feeders below the rail car dump, as well as on the two feeders from the reclaim system. Applied on the outside of the chute, the retrofit wear liner is easy to install without requiring confined space entry. And it can be installed without extensive tear-out of the existing chutes. Rather than waiting for a full plant outage, the installation at NIPSCO Michigan City was completed during a single shift by highly-trained technicians from Martin Engineering.?

Results

Plant management at NIPSCO Michigan City saw immediate results following the External Wear Liner installation. "We are pleased with both the work of the Martin Engineering installation crews and the performance of the Wear Liner," said Terry Weiler, Maintenance Supervisor. "Because it went on easily, we could complete the upgrade without an extensive outage. It refurbished our system and helped us reduce the fugitive material. We are now looking at using the External Wear Liner to upgrade other conveyors in the plant."

Learn More About Preventing Material Spillage