Example of a manual

Example of a manual


MULTIFUNCTIONAL

PRESENTATION

PROMERY MASK

Альтернативный текст для этого изображения не предоставлен

?

Model: 2022PRY-S

?

Innovative multifunctional presentation antimicrobial mask with the

possibility of flexible configuration and use of information systems

?

?

?

?

Warnings regarding safe use and health effects

2

Basic instructions and precautions

3

Device purpose

4

Scope of delivery

5

Main technical characteristics

6

ADDITIONAL INFORMATION ON USING THE DEVICE

8

COMPLIANCE WITH THE REQUIREMENTS

9

?

?

2022

Warnings regarding safe use and health effects

?

Make sure that all users of the device have carefully read the recommendations below before using the device.

The device is not intended for children under 13 years of age.

The output of the image from the rear-view camera to the screen lens of the device should not be used for a long time, as this can negatively affect hand-eye coordination, balance and the ability to perform several tasks simultaneously.

If unpleasant sensations occur, temporarily stop using the device.

Use of unauthorized cables, power adapters, or batteries may cause fire, explosion, or other hazards.

? Use only approved accessories that are compatible with your device.

? The device's operating temperature range is 0°C to 40°C. Using the device outside this temperature range may damage the device.

? Charge your device only with the supplied or authorized cable and power adapter. Use of other adapters may result in fire, electric shock, and damage to the device and adapter.

? Batteries should be recycled or disposed of separately from household waste. Improper handling of the battery may cause a fire or explosion. Disposal or recycling of the device, as well as its battery and accessories must be carried out in accordance with local laws.

? Do not disassemble, break, crush or ignite the battery. If you find that the battery is deformed or damaged, stop using it immediately.

- It is forbidden to create a short circuit circuit with the battery, as this may cause overheating, burns or other injuries.

- It is forbidden to leave the battery in places with high ambient temperature.

- Overheating can cause an explosion.

- It is forbidden to disassemble, break and crush the battery, as this may cause leakage of the battery electrolyte, overheating or explosion.

- It is forbidden to burn the battery, as this may cause a fire or explosion.

- If you find that the battery is deformed or damaged, stop using it immediately.

? Do not wet the device.

? Do not attempt to repair the device yourself. If any component of the device does not work properly, contact Mi Customer support or an authorized service center.

??

If the device is heated, do the following:

? Update your device to the latest software.

? Conflicts between running applications can cause

the temperature of the device to rise. Restart the device.

? Disable Wi-Fi, GPS and Bluetooth functions if they are not in use.

? Close applications that consume battery power intensively or run in

the background and are not used.

? Delete unnecessary files and unused applications.

? Reduce the brightness of the screen.

? If the device overheats or heats up, do not use it for some

time. If the device does not cool down for a long time, contact the service center.

?Basic instructions and precautions

When using the device, you must always follow the instructions given and take into account the warnings described in order to reduce the risk of injury or unpleasant sensations.

Make sure that the device is firmly and securely attached to the head.

The device and the lithium-ion battery may heat up during intensive use, if heated, stop using the device or disconnect part of the functional. Prolonged use of an overheated device may cause burns.

Using high volume levels can cause permanent hearing damage. The presence of background noise, as well as prolonged exposure to loud sounds, can cause the sounds to appear quieter than they actually are.

?Device purpose

The innovative multifunctional presentation antimicrobial PROMERY MASK is designed for everyday wear and disinfection of the surrounding air in order to maintain the health of the user with the help of replaceable innovative filters.

Additional PROMERY MASK functions:

- heat recovery of inhaled and exhaled air (allows you to save the internal resources of the user's body, comfortable air temperature during breathing, for reference: heat loss during convection is from 20 to 30%);

- listening to music and text from an external device (smartphone, computer, internet and etc.);

- amplification (including directional amplification) of external sounds (for people with minor hearing aid disorders);

- recording and transmitting voice messages;

- navigation with playback of voice prompts and visualization on the built-in screen lens;

- recognition and optical magnification (approximation) of remote objects, inscriptions, drawings, etc. with visualization on the built-in screen lens (the function of translation and audio transmission of inscriptions is available);

- stream the optical image lens with rear view camera;

- displaying, at the user's request, the parameters of the user's body functioning (temperature, blood pressure, pulse, blood oxygen saturation, percentage of oxygen absorbed during breathing, concentration of attention) with visualization on the built-in screen lens;

- using social networks using audio commands with visualization on the built-in screen lens;

- amplification, retransmission and correction of the user's voice characteristics using the built-in speaker and processor (voices of celebrities, announcers and presenters, famous phrases of movie heroes, additional voice packages are available - at the user's additional request);

- built-in online voice translator with two-way translation into 4 languages (English, Chinese, German, Russian), additional language packs - at the request of the user;

- the built-in GSM connection will allow you to communicate with your friends and transmit video from the built-in camera online, wherever you are (you can forget your smartphone at home - you won't need it, all functions are in one mask);

- audio and visual notifications of approaching potentially dangerous objects based on geolocation and telemetry data;

- the built-in LED flashlight will help you not get lost in the dark, the flashlight is equipped with two types of lenses and LEDs (directional luminous flux, polarizing luminous flux with SOS signal transmission function and a separate SOS signal power supply);

- the built-in beacon will help you find you in difficult conditions or find your mask if you lose it (signal transmission time from an independent power source for up to 9 days).

?

The mask contains additional hidden functions, the possibility of using which will appear in the process of updating the drivers of embedded devices (image projection, adaptive color design, etc.).

The multifunctional presentation antimicrobial PRIMARY MASK is powered by a removable lithium-ion battery located in the back of the device, the battery is equipped with an innovative solar battery charging.

Альтернативный текст для этого изображения не предоставлен

?

Scope of delivery

The following components are included in the delivery package:

? Scope of delivery and set of available accessories predominantly in different regions and regional suppliers services.

? Main accessories supplied for this device and may not be compatible with other def.

? Appearance of products and technical characteristics be changed without prior fixation.

?Standard equipment of the product:

Альтернативный текст для этого изображения не предоставлен


Main technical characteristics

Moisture protection IP68

Lithium-ion battery 3.8 V, 12000 mAh.

Duration of operation in standard power consumption mode - 3 days

Duration of operation at full load – 14 hours, does not apply to the independent power consumption of built-in signaling devices

Processor - 6 cores, frequency 3223 MHz

RAM 16 GB

The amount of internal memory 512 GB

Dual 12 MP camera system: wide-angle and ultra-wide-angle

Wide angle: aperture ±/1.6

Ultra-wide angle camera: the aperture is ±2.4 and the viewing angle is 120°

Optical zoom 5× to reduce

Digital zoom up to 9×

Speaker - 2 pcs. Total output power 5W.

Headphones:

Lower reproducible frequency, Hz - 20

Upper reproducible frequency, Hz – 20000

Wireless charging with up to 15 watts

?

Retractable Smart lens (transparent waveguide lens):

- viewing angle 52 degrees

- screen resolution of 47 pixels per display degree or 2048 x 1080 pixels

- display refresh rate 120 Hz

- holographic processor

?

Cellular and wireless communication:

- 5G NR (диапазоны n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n30, n38, n40, n41, n48, n66, n77, n78, n79)

- FDD-LTE (диапазоны 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 18, 19, 20, 25, 26, 28, 30, 32, 66)

- TD?LTE (диапазоны 34, 38, 39, 40, 41, 42, 46, 48)

- UMTS/HSPA+/DC-HSDPA (850, 900, 1700/2100, 1900, 2100 МГц)

- GSM/EDGE (850, 900, 1800, 1900 МГц)

SIM card format - nano-SIM + usim / usim + eSIM

The number of SIM cards is 2 pcs.

Built-in cellular module model: 29187WWERY -22

Module software version: ?ERY -22\1-1

?

Wi?Fi 6 (802.11ax) with MIMO 2×2 technology

Bluetooth 5.0 Wireless technology

Built-in combined Wi?Fi/ Bluetooth 5.0 module model: WWERYwe1 -22

Module software version:?BLRYwe1 -22

?

Ultra Wideband chip for determining the position in space 5

NFC module with reading mode support

?

Geoposition:

- built-in GPS, GLONASS, Galileo, QZSS and BeiDou module

Accurate location detection function

Sensors:

Barometer

Three-axis gyroscope

Accelerometer

Proximity sensor

Ambient light sensor

Thermometer

Moisture meter

Pulse Oximeter

?

Software version of the device: PR-1

HW version of the device: 1.0

???

ADDITIONAL INFORMATION ON USING THE DEVICE

See the user manual at: https://promery.tilda.ws

To update the firmware, see the software at: https://promery.tilda.ws/page26138777.html

Device recycling information at: https://promery.tilda.ws/page26138777.html

Comments, suggestions, general questions and answers from device users at: https://promery.tilda.ws

Information about the product number, IMEI number, date of manufacture, see the label located on the back of the product, the information is duplicated on the individual packaging of the product.

?

Manufacturer:

PROMERY Ltd.

Avenue Pobediteley 17, office 810-812,

220004 Minsk, Belarus

phone number: +375 17 215-01-46, email address: [email protected]

?

A person authorized by the manufacturer on the territory of the Republic of Belarus and the Eurasian Economic Union:

PROMERY Ltd., Avenue Pobediteley 17, office 810-812, 220004 Minsk, Belarus, phone number: +375 17 215-01-46, email address: [email protected]

?

Restriction of use

This WLAN (Wi-Fi) device is intended for indoor use and operates in the 5150-5350 MHz frequency band.

??

Compliance with the requirements

Соответствие требованиям:

The device meets the requirements:

Устройство соответствует требованиям:

Technical regulation of the Eurasian Economic Union:

ТР ТС 020/2011 “Electromagnetic compatibility of technical means”

Технического регламента Евразийского экономического союза:

ТР ТС 020/2011 “Электромагнитная совместимость технических средств”


Альтернативный текст для этого изображения не предоставлен



Registration number of the declaration of conformity:

ЕАЭС № BY/112 11.01. ТР037 020 02ХХХ

Date of registration of the declaration of conformity: 04.04.2022

?Регистрационный номер декларации о соответствии:

ЕАЭС № BY/112 11.01. ТР037 020 02ХХХ

Дата регистрации декларации о соответствии: 04.04.2022

?

?

Technical regulations of the Republic of Belarus:

“Means of telecommunications. Security” (TR2018/024/BY)

Технического регламента Республики Беларусь:

?Средства электросвязи. Безопасность? (ТР2018/024/BY)

Альтернативный текст для этого изображения не предоставлен

?



Registration number of the declaration of conformity:

BY/112 11.01. TR024 030.01 00ХХХ

Date of registration of the declaration of conformity: 04.04.2022

?Регистрационный номер декларации о соответствии:

BY/112 11.01. TR024 030.01 00ХХХ

Дата регистрации декларации о соответствии: 04.04.2022

?

Declarations of conformity accepted: PROMERY Ltd., Avenue Pobediteley 17, office 810-812, 220004 Minsk, Belarus, phone number: +375 17 215-01-46, email address: [email protected]

要查看或添加评论,请登录

DENIS Abadouski的更多文章

  • TR 2018/024/BY QUESTIONING AND ANSWERS

    TR 2018/024/BY QUESTIONING AND ANSWERS

    TR 2018/024/BY Technical Regulations of the Republic of Belarus "Means of telecommunication. Safety? STANDARD…

  • SOVIET "MIRACLE"

    SOVIET "MIRACLE"

    I wrote this article in 2012 in order to debunk the myth about advanced technologies and enterprises of the Russian…

社区洞察

其他会员也浏览了