The energy wheel of Materials

The energy wheel of Materials

First, I wanted to state that I am not an authority on the subject, but I am publishing from my personal feelings and based on what I have absorbed and internalized throughout my life.

Each material has its own energy depending on the type of material and the temperature at which it is staying.

According to what is accepted today in physics, the zero temperature of all substances in the universe is defined as absolute zero according to the Kelvin temperature scale.

Attempts are being made to reach this temperature but so far without success and there are reasons for this.

It is also known that when you lower the temperature of a substance, it becomes more solid but also more brittle.

Lowering the temperature of a substance also causes a decrease in the internal energy of the substance, and a decrease in its volume, and probably as a result of this also a decrease in the speed at which the particles of the substance move within the substance and a looser grip of the particles on each other.

The solidification of the material is caused by the reduction of the volume of the material and its brittleness results from the decrease in internal energy and a decrease in the reduction of the forces acting within the material and the speed of movement of the particles of the material.

The meaning of what we have said so far is that if we reach the point of zero temperature with any substance, it will break down into the smallest particles due to which the forces that hold the substance in its position will also be reset as a result of the temperature of the substance dropping to its zero.

Therefore, even if we find a way to lower the temperature of the material to the zero point, we will not succeed, since the materials and systems will disintegrate before then.

In my estimation, at the zero point of the material, the material will disintegrate by itself and an explosion will occur resulting from the disintegration of the material, which will cause the particles of the material to accumulate energy from the heat of the explosion and unite into a new material with internal energy. It will probably also be the maximum temperature that a material can reach and this new material will begin a new cycle of its energy wheel.

On each line in this opinion, a complete study can be developed, which can advance humanity to new heights and I will list the main ones among them:

- Is the temperature of absolute zero according to the Kelvin scale really the temperature of absolute zero?

- Do different substances have a different zero temperature at which they decompose. A very important topic for understanding the use of materials for different purposes.

- Does the material really break down at its zero temperature point or does a different process happen there than I estimate will happen.

- Another subject that needs to be researched and will not be found here is whether it is possible to produce energy in the process of cooling and not only in the process of heating

A very important topic because the production of energy through heating causes a large part of the energy to be lost to the environment so that we use the energy quite partially.

If we manage to produce energy in the process of cooling, we will not lose energy to the environment, but on the contrary we will absorb energy from the environment that will be hotter than the system that will produce the energy, this means that we will receive more energy than we invested

In my opinion, there is a way to produce energy also in the process of cooling.