Electromagnetic Flow Meter Applications

Flow measurement is a basic and important control parameter for practically many industrial processes. Aplus Finetek Sensor, Inc. Electromagnetic Flow Meter, EPD30 offers the industry’s widest range of liners, electrodes and sizes 1.5" to 12" to match a variety of applications including the Chemical Processing, Oil & Gas, Feed Milling, Water Treatment, Food & Beverage, Concrete industries, and more. The transmitter is easy to use and provides different output formats (including RS-485, 4-20mA, Pulse) with 3 Models to choose from:?Integrated (Standard), Remote, and Sanitary. FineTek owns a Class 2 flow test laboratory, and it conducts calibration in Class 1 Flow Laboratory of the National Measurement Laboratory (ITRI Measurement Center). ISO 9001:2015 and ISO 17025 Accredited.

Measurement is virtually independent of density, viscosity, temperature, pressure and conductivity. The electromagnetic flow meter has no moving parts to prevent pressure losses and pipe blockage. Electric conductive liquid and fluids with low solid contents can also be measured. Easy installation and simple piping design requirement upstream 5D and downstream 2D. Self-diagnosis function to check magnetizing signal, empty pipe and contaminated electrode. It can be widely applied in the conducting liquids that may contain fiber, solid granules and suspended matters. Wide measurement turndown ratio can reach 1:100, which can be set randomly and achieve high accuracy for small flow measurement. Integrated backlit display of two rows, dual isolation, parameter setting, menu-type operation, memory function, reliable programming, password lock and access, small signal elimination, non-linear correction and two-way measurement.?

Aplus Finetek Sensor's EPD30 Electromagnetic Flow Meter has been successfully implemented in a variety of applications including Chemical Processing, Oil & Gas, Feed Milling, Water Treatment, Food & Beverage, Concrete industries, and more.

Accurate and reliable water flow is essential in a scrubber application. The EPD30 electromagnetic flow meter has no moving parts to prevent pressure losses and pipe blockage and measurement is virtually independent of density, viscosity, temperature, pressure. and conductivity.

In a brewery application, accurate and reliable measurements are an integral part of brewing process as it takes the guess work out of providing the correct amount of water and to reduce waste. Aplus Finetek Sensor's EPD30 electromagnetic flow meters are used throughout the entire process in the brewhouse, cellars, packaging and utilities. It is important and cost effective for breweries to reduce cost due to water usage and to reduce costs associated with product waste and wastewater.

During Dye manufacturing, the dyes are in slurry form made up of color particles and water. The dye must be measured accurately while it is in slurry form as well as after drying to determine the effective drying rate. The EPD30 electromagnetic flow meters can measure virtually any conductive fluid or slurry.

In a Surfactant manufacturing, the EPD30 electromagnetic flow meter monitors water consumption and controls production cost. Surfactant production takes place in facilities under carefully controlled conditions and water plays an important role in the production of surfactant. The EPD30 electromagnetic flow meter has no moving parts to prevent pressure losses and pipe blockage and measurement is virtually independent of density, viscosity, temperature, pressure and conductivity.

In a Public Utility, Water Treatment plant, the EPD30 electromagnetic flowmeters are used for Hot Water/Chilled Water/Condensate water network flow monitoring. The EPD30 has no moving parts to prevent pressure losses and pipe blockage and measurement is virtually independent of density, viscosity, temperature, pressure and conductivity. The process will provide plant with higher capabilities and increased robustness in water treatment technology and processes.

In a Public Utility, Power Group Cooling Tower System Water Treatment, the EPD30 electromagnetic flowmeters are used for various cooling tower water system flow monitoring in heat exchangers, tanks and columns for Chill water supply, Chill water return, Cooling tower supply, Cooling tower return. Efficient water and cooling tower management is essential in maintaining proper design flow and providing adequate cooling.

In a Livestock, wastewater application, the use of electromagnetic flow meters to gather and treat discharge wastewater can play a vital role. Aplus Finetek Sensor's EPD30 Electromagnetic flow meter can measure virtually any conductive fluid or slurry, including water and wastewater. Applications ranging from water storage, transmission to wastewater treatment; and pump control. The EPD30 has no moving parts to prevent pressure losses and pipe blockage and measurement is virtually independent of density, viscosity, temperature, pressure and conductivity.

Chlorination system in cooling water towers is essential to effectively control bacteria, algae and slime and fouled heat-exchange surfaces especially during higher temperatures. For cooling water, there are three possible application points for chlorination - intake water, circulating water and service water. Aplus Finetek Sensor's EPD30 Electromagnetic Flow Meter offers the industry’s widest range of liners, electrodes and sizes 1.5" to 12" to match a variety of applications in the Chemical Processing, and Water Treatment.

Accurate and reliable measurement of water is a must for Ready mix concrete plants. Most end-users use mechanical water meter as a general production for water monitoring. However, if there is sludge, impurity substance in the medium, those ingredients will jam the mechanical rotor effecting the monitoring performance or unable to measure the flow. To tackle the issue in the mechanical rotor, the component needs to be disassembled to clean within a certain interval and thus increasing the maintenance cost and it is time-consuming. Remote type Electromagnetic Flow Meter has been installed underground. Electromagnetic flow meters have no moving parts and hardly require any maintenance.?