Electro-Hydraulic Drum Brake

The structural form of the electro-hydraulic drum brake is the bent arm structure welded with steel plate, the brake spring is the compression type, and both ends are tight and flat, which conforms to the standard of GB / T1239.4; its layout is horizontal; this type is equipped with the brake torque scale; it has the brake torque and brake pad setback adjustment function and anti loosening measures; the swing hinge point is equipped with the lubrication sleeve; its junction box is equipped with grounding The brake pad is semi-rigid.

The driving device is a single push rod electric hydraulic pusher with oil level indicating device, and the insulation resistance of the pusher is qualified; Under the rated frequency, the thruster can push up the corresponding load to the rated stroke; when the thruster runs to the thermal steady state, there is no oil leakage in its shell and any seal; when the thruster continuously acts, there is no sticking and crawling phenomenon in its push rod movement; and there is no serious wear on the main swing hinge point, and there is no serious deformation of the transmission components.

E-mail: [email protected]

Website: https://www.hongqiaobrake.com/

VR link of Hongqiao brake: https://720yun.com/t/b3vkOmq701q?scene_id=56698532