EASY CLEAN GRAFFITI PROTECTION

A one pack single coat permanent non-sacrificial coating giving excellent protection against fly poster and graffiti attack. The product allows easy repeated removal of graffiti by using water/detergent. NOT a temporary or sacrificial, semi-permanent graffiti protection.

7626 Graffiti Protection is ideally suited for locations which encounter regular graffiti events. It offers enormous flexibility in terms of application. It can be applied to almost all surfaces. The layer itself is also flexible and this characteristic is the reason why graffiti is unable to bond effectively, thus creating a world leading, vandal resistant finish.

7626 Graffiti Protection is completely resistant to ALL paints, permanent markers, inks and the majority of acids. Simply wash with water and graffiti disappears and posters just slide off, providing permanent protection against graffiti attack – without ghosting residue. Prevents the leaching of pigments into the building surface.

7626 Graffiti Protection is ideal (without primer) for the following applications:

Aluminum Siding, concrete (tunnels, train route walls, noise barriers, bridge structures, masonry etc.), fibreglass, glass (not applicable to plexi glass?), masonry (includes brick, marble, (natural) stone, clinker, tile and granite), metal & Plastic (bonding to polished and smooth surfaces is not as profound as bonding to roughened or porous surfaces.), steel, street signs, stucco, utility boxes, vinyl siding & wood .

Attributes:

Single Component System – very strong bonding

One coat in most cases is sufficient (some highly porous surfaces, e.g. sand Stone, may require a non-darkening primer coating or 2 coats of 7626 Graffiti Protection which can be applied within 30 minutes in hot environments and 3-4 hours below 20°C). Open the can and roll it on. No mixing and no messing means less labour cost. In most instances the coloured variants can be used to ?paint over“ existing graffiti. Also usable to protect ?good graffiti“ (graffiti art). It does not bond strongly to smooth surfaces such as stainless steel.

Tough resilient finish

Unlike most anti-graffiti systems, 7626 Graffiti Protection cures to an easy clean layer – with just one coat. The surface can be cleaned without using any graffiti remover. It is just enough to use a high pressure washer (max. 80 Bar) or a soft brush. The surface offers a long protection lifetime and cleaning cycles over several years.

Rapid Curing

It‘s easy to apply, so it‘s not time-consuming, it means low labor costs and the coating is functional within hours.

Prolonged Protection – Zero Ghosting

Graffiti can normally be removed quickly and easily using just water. In most instances graffiti removal liquids are not necessary It won’t show any ghosting. There is no need for reapplication after the graffiti has been removed. The clear finish does not yellow over time.

Clear and coloured

Available in a clear finish and in all RAL colors, MOQ 100L for coloured variants.

Long Term Protection

No ?Dangerous Goods“ shipping fees

Further Information: