DuPont DOW Integraflux SFP-2880XP Equivalent TFSFX-2880P

TFSFX-2880P is manufactured as an equivalent, replacement, alternative, retrofit, analogue, derivative and substitution to replace DuPont DOW IntegraFlux SFP-2880XP (SFP2880XP) UF membrane module.

TFSFX-2880P membrane modules are pressurized modules, which are designed and manufactured for the filtration of surface water, potable water, seawater, industrial wastewater and municipal sewage. These UF modules are made of?upgraded new generation PVDF hollow fibers with extra permeability.

These series UF modules are applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.

Features

• Outside-to-inside flow direction
• New generation PVDF hollow fiber
• Nominal pore size of 0.03 μm
• Typical filtrate quality SDI≤2.5, turbidity≤0.1 NTU

Advantages

• High tolerance for feed water
• High-quality filtrate
• Less energy needed by extra high permeability
• Longer service life by high fouling resistance and mechanical strength
• Direct and economical module replacement

Applications

• Surface water
• Potable water
• Municipal sewage
• Beverage clarification
• Industrial wastewater
• Reclaimed water reuse
• Pre-treatment of sea water desalination

Module Dimensions

L: 2360±3 mm (92.9±0.1 inch)

L1: 2130±3 mm (83.9±0.1 inch)

D: 225 mm (8.9 inch)

H: 180 mm (7.1 inch)

Connector: DN50

Specifications

Effective membrane area: 77 m2(829?ft2)

Volume: 39?L(10.3?gallon)

Dry weight: 61?KG(100?lbs)

Wet weight filled with water: 135?KG(220?lbs)

Membrane material: PVDF(Polyvinylidene Fluoride)

Fiber ID/OD: 0.7/1.3 mm(0.02/0.05 inch)

Flow direction: Outside-in

Pore size: 0.03?μm

Housing material: UPVC

Clamp material: Stainless Steel

Potting material: Epoxy?resin/Polyurethane

Operating and Cleaning Limits

Type of operation: Dead-end flow or cross flow

Design flux(25°C): 40-120 L/m2·h(24-71 gfd)

Temperature: 1-40°C(34-104°F)

Maximum feed pressure(20°C): 6.25 bar(90.6 psi)

Maximum feed pressure(40°C): ?4.75 bar(68.8?psi)

Maximum trans-membrane?pressure: 2.1?bar(30.5?psi)

Backwash flux(25°C): 80-120 L/m2·h(48-71 gfd)

Maximum backwash pressure: 2.5 bar(36 psi)

Maximum air scour feed pressure: 2.5 bar(36 psi)

Maximum air scour flow: 4-12 Nm3/hr(2.4-7.1 scfm)

pH-Continuous operation @25°C: 2-11

Maximum NaClO: ?2,000 mg/L

Maximum?feed TSS: 100 ppm

Maximum feed turbidity: 300 NTU

Maximum feed particle size: ?300?μm

Filtrate SDI15: ≤2.5

Filtrate turbidity: ≤0.1 NTU

For more details, please visit our website: https://www.tanalwater.com/e_products/taflux-sfx-series-16-23.html.

For DuPont DOW Integraflux SFP-2880XP equivalent and more UF membrane modules, please send me an email to [email protected] or contact me on Mobile/WeChat/WhatsApp: +86-155 2707 6891.