Do you know all the shelving

1. Lightdutyshelf: It is made of a cold-rolled steel plate, stamped and formed, easy to disassemble, and can be combined flexibly. Strong transformation. It can meet the customer's placement requirements to increase or decrease the number of layers to achieve the best effect. The column is made of angle steel, and the height of the laminate can be adjusted up and down by 50mm. Structure: laminates, supports, column sleeves, columns, fixed up and down.#metalstoragerack #metalshelves

2. Medium A-type shelf: It is easy to assemble and disassemble, and has a beautiful appearance. It is suitable for the manual storage of goods. The load capacity is generally 200-350KG/layer, which can meet the needs of most customers. The upper and lower intercepts of the laminates can be adjusted by 50mm. Structure: No bolt connection, fixed up and down by laminates, safety buckles, beams, columns, corner sleeves, and hanging pieces.

3. Medium-volume B-type shelves: It is also suitable for manual storage and retrieval of goods. Compared with A-type shelves, since the laminates are laid in the width direction, the bearing capacity is greatly improved, and it is widely used in various industries. It is low in cost and safe and reliable. , easy to assemble and disassemble, can be used alone, or freely arranged into various arrangements, the bearing capacity of each layer is about 800KG, and the intercept is generally adjusted at 50mm. Structure: Columns, beams, diagonal braces, cross braces, laminates, feet, side panels, back nets, and effective parts of back panels can be added as appropriate, and beams are required for each floor.#heavydutyindustrialshelving #shelfracks

4. Beam shelf: The most common type of shelf provides 100% access and has good picking efficiency, but the access density of this kind of shelf is low and requires more aisles. Usually, 3-5 layers are used, and the shelf height limit is generally below 10M, suitable for general forklift access, can be adjusted and combined arbitrarily, safe and simple, and cost-effective, and the entry and exit of the warehouse are not restricted by the order of items. According to the width of the rack access lanes, it can be divided into traditional lanes and narrow lanes (which need to be used with appropriate forklifts). 1) To meet the larger carrying requirements, the maximum height can reach 16M. 2) Adjust the position of the beam with a pitch of 75 to better meet the requirements of the stored goods. 3) If any part is damaged during use, it can be easily replaced. 4) The surface of the shelf is treated and has high corrosion resistance. 4) The surface of the shelf is treated and has high corrosion resistance. 5) You can choose more abundant accessories and safety accessories. 6) Assembled shelf structure, easy and fast to install. 7) The components are made of high-quality materials, the welding is firm, and the installation is tight. 8) Perfect accessory system, suitable for various special requirements.

Structure: main and auxiliary points, columns, diagonal braces, cross braces, corner guards, beams, if necessary, install support frames and other components according to the shape of the goods.

5. Drive-in rack: Drive-in racks are also called through racks or corridor racks. It is a continuous integral shelf that is not divided by aisles. On the leg shelf, the trays are accessed in the depth direction, which makes the storage density of the drive-in shelf high, and the goods enter and exit from the same side of the shelf. Forklifts can easily drive into the middle of the shelf to store and retrieve goods. The investment cost of drive-in racks is low, and it is suitable for situations with large horizontal dimensions, few varieties, and large quantities. Due to its high storage density and high utilization of ground space, it is often used in cold storage and other places with high access space costs.

1) High access density and poor accessibility.

2) It is suitable for the storage of items with small samples and large quantities. 3) The height can reach 10M.

4) Access to items is limited by the order of storage, and it is not easy to achieve first-in-first-out

5) Not suitable for items that are too long and too heavy. Structure: legs, cross braces, diagonal braces, beams, guide rails, bollards, columns

6. Cantilever beam rack: The column is equipped with an external cantilever arm, which is suitable for storing long items such as steel pipes, section steel, or plates. When placing round objects, install a gear lever at the end of the cantilever to prevent the objects from slipping.

1) It is only suitable for the storage of long strips or long rolls of goods.

2) Suitable for handling equipment with wide fork distance.

3) The height is limited, generally below 6 meters.

4) The space utilization rate is low, generally around 35%-50%.

5) Suitable for building materials production factories, furniture manufacturers, or supermarkets. Structure: cantilever, column, diagonal brace, cross brace.

7. Press-in shelf: The press-in shelf is composed of guide rails, beams, columns, and carrying trolleys. The rails are fixed on the beams at a certain angle, and the trolleys run on the tracks. The pallets are pushed in from the front, and the pallets are placed On the sliding seat, the later filling will push the original to the rear, currently, a maximum of 5 trays can be pushed. The sliding seat is on the slide rail, and the slide rail itself has a certain inclination, and the sliding seat will automatically slide to the front entrance. The overall structure adopts the principle of "magazine clip". The pallets are placed on the trolley and pushed into the shelf in turn. The access method is the same as that of the drive-in shelf, but the forklift does not need to drive into the shelf, because the depth direction of the shelf It can be designed as multiple pallet positions, and the space utilization of press-fit shelves is higher than that of ordinary shelves. The safety and operation effects are higher than those of drive-in racks and are widely used in cold storage, libraries, electronics, and other industries. 1) High storage density, poor access, the general depth can be 3 storage bits. 2) Compared with the beam-type shelf, the utilization of space can save 1/3 and increase the storage density, but it cannot achieve the first-in, first-out management of goods. 3) Use a general forklift to access. 4) Applicable to items with small quantities and large quantities. 5) Not suitable for carrying heavy items. 6) Items will automatically slide to the front storage position.

8. Fluent shelves: It consists of fluent strips, rollers, columns, beams, and tie rods. This kind of shelf is also called a roller shelf, and the goods are sent from one end to the other end through rollers. The goods slide down by their own gravity, which can realize the "first in, first out" operation. Low cost of use, fast access speed, and high density. Roller-type aluminum alloy or sheet metal fluent strips are set between the beams of each layer of the shelf, and they are placed on a certain slope. The goods are usually packed in paper or placed in plastic turnover boxes, and the flow and first-in-first-out of the goods are realized by using their own gravity. The goods are transported by trolleys, with manual access and convenient access. A load of each layer of the unit shelf is usually about 1000 kg, and the shelf height is within 2.5M. It is suitable for process conversion on both sides of the assembly line and picking operations in the distribution center. It can be equipped with electronic tags to realize information management of goods. Widely used in supermarkets, pharmaceuticals, chemicals, and electronics industries. 1) The fluent type is to place the goods on the rollers, use one side of the channel to store the goods, and the other side to remove the goods. 2) The shelf is inclined downward towards the shipping direction, and the goods slide down under the action of gravity. 3) It can realize first-in first-out, and realize one-time replenishment and multiple picking. 4) Fluent shelves have high storage efficiency and are suitable for short-term storage and the picking of large quantities of goods. 5) This total shelf is generally used in logistics centers, freight lines, publishing houses, and factories with a high degree of automation.

9. Gravity shelves: Gravity racking uses one side of the aisle for storage and the other side for access. The drum line is fixed on the beam at a certain angle. The pallet is lowered from a high place and slides down along the drum line by its own gravity. In order to control the pallet and slide down stably and avoid a collision, every Set a damping system at a certain distance, the faster the pallet slides down, the greater the resistance generated by the damping system. The end separation mechanism is arranged at the lower end to separate the two adjacent trays at the lowest end so that the lowest end tray can be taken out smoothly. Gravity shelves have relatively high requirements on pallets, and the current use of wooden pallets The use is relatively mature, and other material trays need to provide actual trays for damping experiments. The utilization rate of gravity racks is higher than that of press-in and drive-in racks. Moreover, the principle of "first in, first out" is being realized. The safety and operation effects are the same as those of beam racks. The storage density is very good, but the cost is very high. It is suitable for applications with small samples, large quantities, and high frequency.

1) Use a large amount of storage and ship in a short time.

2) Suitable for Class B goods in ABC classification.

3) Use first in first out.

4) Use dense runners to store stacks, and the space utilization rate can reach 85%. 8) The construction cost is high and the construction is slow.

5) Use a general forklift to access.

6) The height is limited, generally below 6 meters.

7) Each runner generally only stores one kind of goods.

Structure: It consists of a drum line, drum, column, beam, tie rod, limit device, separation device, guide guard plate, and guardrail.

10. Drawer shelf: Also called a mold-type shelf, it consists of columns. Drawer levels pull rods, self-locking devices, bearings, and slides. This kind of shelf is suitable for storing various molds. The top can be equipped with a chain hoist and a horizontal moving trolley to facilitate the lifting of the molds. 2/3 of the drawer layer can be removed. The drawer layer is mainly composed of slideways, laminates, and bearings. The laminate is also composed of a stress-bearing frame and steel plates. Each slideway is fixed up and down by two bearings, which can roll freely in the guide groove with low resistance. The drawer can be easily pulled out with one hand, reducing labor intensity. The self-locking device is composed of a positioning spring and a pin shaft, which ensures that the drawer cannot be moved after it is in place, and does not affect the operation of the drawer within the travel range. 1) Assembled from a variety of combined parts, the structure is simple and easy to disassemble, transport and assemble 2) There is a roller track under the drawer board, which can still be pulled free with a small force after being loaded, and the slide is smooth. 3) Additional positioning safety devices, safe and reliable, can be drawn out by 66%, and each layer can store 500-2000KG. It is an indispensable storage item for modern factories. 4) The drawer-type shelf occupies less space, has a large load-bearing capacity, is classified in detail, and is easy to operate. 5) It is used to store the mold, no forklift is needed, and the top is equipped with a chain to hoist a mobile car, which can realize the lifting of the mold. Widely used in molds.

11. Steel platform: The structure consists of columns, primary and secondary beams, floor surfaces, stairs, and guardrails. Overall assembly without on-site welding. Usually bearing capacity per square meter In the range of 300-1000kg, the column adopts a round tube with strong bearing capacity and less rigidity. The primary and secondary beams can choose the most economical and reasonable H-shaped steel in rigid structure engineering and the C-shaped steel opened by our company according to the load-bearing requirements. Type cold-formed beams, the floor plate is made of our special C-shaped cold-formed checkered steel plate or hollow plate, which adopts the gusset structure and is rigidly fixed with the primary and secondary beams. The overall structure of the entire platform is strong and can be customized according to actual needs. Choose different panels to meet the requirements of fire protection, dust protection, and small pieces of falling protection. The lighting system can be configured under the floor as required. Cargo transportation can be carried out by hydraulic lifting platform, freight elevator, or forklift. All materials are made of high-quality carbon structural steel, fully automatic surface spray treatment, strong bearing capacity, and simple and elegant appearance, and can be used in various industries.

12. Attic shelf Attic-style shelves are used in the case of limited floor space in the factory. Steel beams and metal plates are used to divide the original storage area u into floors. Different types and shelves can be placed on each floor, and the shelf structure has support. The role of the upper floor. 1) Increase storage height and increase space utilization. 2) The upper layer is limited to the storage of light goods and is not suitable for carrying heavy equipment.

13. Tool cabinet

1) High-quality boards and special surfaces are suitable for different factory working environments.

2) The steel load-bearing guide rails stamped by professional molds can make the drawer open easily under no-load and heavy pressure.

3) There is a partition in the drawer, which can freely separate the storage space. 4) Advanced central vertical lock. Ensure safe opening and management of drawers.

5) The special aluminum alloy drawer handle is convenient to replace the label, and it is beautiful and practical.

6) You can freely choose to configure different drawers to fully meet the needs of each household.

7) There are feet on the bottom of the cabinet to protect the cabinet from damage and facilitate handling with forklifts. Divided into single-track and double-track: the single-track load-bearing 100kg, can be pulled out 90% of the height series is 50-300; the double-track load-bearing 200kg, can be pulled out 100% of the height of the series is 75-400.

14. Storage cage: 1) Grid structure, lightweight and high strength. It is easy to assemble and fold and can be stacked in four layers to improve space utilization. 2) The bottom is reinforced with U-shaped steel to ensure the bearing capacity. 3) With handling equipment, can be used in logistics links such as transportation, handling, loading, unloading, storage, and storage

We do not only know our product, but we should also know the industry range where our products are in, what do you think?