DMSW High-Productivity High-Feed Cutter contributed to Rs.85 lakh annual saving through inconel slot milling!

DMSW High-Productivity High-Feed Cutter contributed to Rs.85 lakh annual saving through inconel slot milling!

DMSW ultra high feed milling cutter from Sumitomo supported customer's demand to achieve higher savings in Inconel machining. With 55% increase in tool life and 16% improved productivity, DMSW cutter was able to meet customer's various needs. Below are the important features which makes DMSW cutter as a highly preferred milling cutter:

High-productivity cutter for ultra high-feeds and larger depth of cuts!

  • High productivity thanks to an ultra-high metal removal rate as well as high economic efficiency, due to the stable double sided insert with 4 (LNMU) or 6 (WNMU) cutting edges.
  • The arc-shaped cutting edge reduces the cutting force to a minimum.
  • High-efficiency machining at maximum feed rate per tooth of 3,5 mm/t is possible.
  • New DMSL type with smaller diameter range is launched now.
  • Stable machining without chatter even with long tool overhang condition.
  • Even at higher feed rate, good surface finish can be achieved without a wiper insert.

In case you need more information about DMSW milling cutter, please write back to us on www.mothersontools.com or [email protected]

SEC-Sumi Dual Mill DMSW Type by Sumitomo


要查看或添加评论,请登录

Motherson Techno Tools (JV with Sumitomo Electric)的更多文章

社区洞察

其他会员也浏览了