Decarbonising the Electricity Grid
Fraser Maywood, Ian Porter SEN Chairman
Introduction
There are a number of Podcasts that touch on the issue and a few articles papers on specific technical aspects of increasing renewables penetration but we’ve not heard or seen a good overview on the various technical, commercial and political enablers and hurdles. Well, it is complicated.
Why the grid needs to be decarbonised is self-evident:
1.??????Climate change is a real and urgent problem that needs addressing now; many countries, states, local governments are declaring a climate emergency;
2.??????Thermal power (e.g., coal, gas, oil) aka fossil fuelled power stations and their resultant emissions are a major contributor to climate change;
3.??????When compared to other industry sectors the replacement of fossil fuelled power generation by renewable energy technology is ‘low hanging fruit’ being relatively easy from a technical perspective as all the required technology is available and is now commercially compelling;
4.??????Distributed clean energy delivered on smart grids (i.e., enabled for two-way power flows) provides for a higher level of system security, reliability and the ability to restart quickly in the event of system-wide outages, contingency events and?black out conditions;
5.??????A decarbonised and stronger electricity grid provides an opportunity to decarbonise other sector such as transport, commerce and industry via electrification and via sector-coupling. In many ways it’s an essential first domino;
6.??????It’s the right thing to do.
The purpose of this article is to help answer the following questions, primarily in the Australian context and with application elsewhere:
-?????????how much energy storage is required when you have high levels of Variable Renewable Energy (VRE) in the grid energy mix?
-?????????what are the other barriers to get to 100% (or practical limit) renewables penetration?
The Australian Energy Market Operator’s (AEMO) new CEO and MD Daniel Westerman recently announced {Ref 1} that he “wants the country’s main grids to be able to handle periods of 100 per cent renewable energy penetration by 2025”. Whilst that’s not 100% renewables 100% of the time and he explained in a follow-up interview he doesn’t have a concrete plan how to achieve that goal. However, it does mean the peak National energy planning and energy market operator has recognised the reality when he said “A combination of technical innovation, economics, government policies and consumer choice, is driving this energy transition faster than it ever has before.” {Ref 1}
Objectives
The high-level objectives or an ‘end state vision’ of a 21st century electricity grid are:
Most are of the objectives are self-explanatory, the last three will become evident later in this article.
The transition to a 21st century grid should be rapid (by 2030 to enable other sectors to electrify in time), just and fair to the various stakeholders. “Just and fair” are of course somewhat subjective.?
Stakeholders
As with any project, identifying the stakeholder group is essential in uncovering the various perspectives, needs and drivers, barriers, backers and blockers.
Within each stakeholder groups, individuals will have varying Worldviews which govern how they see the energy transition, formulate their intentions and execute their plans.
Stakeholders include:
Current Situation
The Australian National Energy Market 12-month historical fuel mix (Ref 20) is shown in Figure 1-1 below with fossil fuels currently dominating the energy mix at ~76% (black and brown coal + gas) as at July 2021, refer Fig `1-1’ below. The instantaneous figures on any given day can be deceptive and hence a 12-month average is a better one to consider.
Whilst displacing that amount of fossil fuel in the time required may initially seems like an impossible task, however South Australia (SA) have shown what can be done in a relatively short period of time given the political will. SA electricity market renewables currently sit at 50% after their energy minister Dan van Holst Pellekaan set a goal in 2020 of getting the state to a target of “net 100 per cent renewable electricity” before 2030. SA enjoys bipartisan support of the clean energy transition, linked to broad public support and high levels of roof top solar.?On Oct 11th 2021, South Australia was powered entirely by renewables for one hour. (Ref 22)
Such ambitious targets are required as the grid needs to be decarbonised early to allow other sectors currently using fossil fuel to electrify as far as practical and hence achieve full decarbonisation by at least 2050 (or to achieve overall net zero status).?
Figure 1?1: Australian NEM 12-month Energy Mix September 2021
Options, Hurdles and Solutions
Options
How to decarbonise the grid is context sensitive – in Tasmania (TAS) with its abundant hydro-power and established wind power and with the energy mix currently at 99% renewable energy, the job is largely done. Albeit TAS is heading for 200% renewables in their clean energy export plans - the other ‘battery of the nation’.?The pace of this additional export initiative is contingent upon leveraging renewables uptake on the NEM otherwise the pumped hydro additions may result in unintended consequences such as backing-up coal fired power stations during times of heavy ramping and runback when responding to the PV duck curve.?Ramping is required to meet system demand at peak times during periods of reduced wind and solar resources.
Looking broadly at the NEM the viable energy options need to meet certain criteria to achieve the stated Objectives and the decarbonising timeline. This screens out or limits options:
1.??????Nuclear?– a favourite of some and illogical for others. Nuclear power generation in any shape or form (including small scale modular reactors favoured by Bill Gates, Barnaby Joyce and others and which only currently exist as computer simulation) in Australia is not feasible as it would take too long to establish (circa 15 years) and hence miss the decarbonisation deadline (subs are a different kettle of fish).?Australia is abundant in lower cost solar and wind resources resulting in more competitive energy costs than deliverable by power from nuclear sources. The other pros and cons of nuclear can be endlessly debated but in the Australian context for the task at hand they are largely irrelevant.
2.??????Bio-fuels?– not sustainable at the scale required to displace fossil fuel, also some bio-fuel approaches are not carbon neutral.
3.??????Post combustion carbon capture and storage?(CCS) of fossil fuel power stations are not considered feasible given the cost, access to co-location of suitable CO2 storage reservoirs, risk and better cheaper options. Thermal power plants (especially coal fired and combined cycle gas turbines) are designed to run steady-state at near maximum load and are not best suited to operate flexibly as capacity generators in a market with increasing renewables. Given renewables are now the lowest Levelised Cost of Electricity (LCOE), and the flexibility, capacity and the reducing cost of batteries, VRE is pushing thermal units out of the market. Those thermal plants then face lower utilisation factors, increasingly unfavourable operating conditions (such as ramping, negative power prices), higher maintenance costs and higher unit electricity costs thus accelerating their market exit (death spiral). Adding CCS, without significant (and unnecessary) government market intervention, would further accelerate this cycle;
4.??????Geothermal?– not commercially available at the scale required in the timeframe needed;
5.??????Wave and tidal power?– in the mix but why bother risking it when you have offshore wind?
6.??????Landfill gas, sewage treatment plant gas and biogases?– in the mix and worth doing but won’t scale to the required level
7.??????Roof top solar?– in the energy mix;
8.??????Utility scale solar?– in the energy mix;
9.??????Onshore wind?– in the energy mix;
10.??Offshore wind?– in the energy mix;
11.??Hydropower, pumped hydro?– in the energy mix where regionally applicable;
12.??Battery storage?(domestic, vehicle, community and utility scale) in the energy mix; Lithium batteries provide typically short duration (<4hrs) high cycling rate, most suitable for short/momentary fast response ride-through at full power.
13.??Hydrogen storage?Emergent technology suited mostly for the deep decarbonisation phase supporting seasonal/long duration energy storage (LDES) taking advantage of frequent spilled energy stored for the occasional (low cycle rate) lengthy duration storage to compliment battery storage within the energy mix.
14.??Natural Gas?– in the energy mix (where regionally applicable) as a generator of last resort or in a standby duty for periods of long duration incapacity of renewables. Whole of supply chain emissions would need to be offset taking into consideration planned operational hours and a grid carbon intensity target (CO2e per MWh). Post-combustion CCS is not considered feasible as noted above.?
Hurdles
There have been numerous hurdles for renewables to overcome, most are now historical and of the current challenges some are real, some more commercially and politically motivated. Following are perceived as the main hurdles and potential solutions.?
Cost
The continued price reduction in renewables and battery storage has been well reported – they are now the recognised lowest levelized cost of electricity (LCOE) and lowest levelized cost of storage (LCOS) i.e. short to medium duration periods (typically <2-4hrs) and frequent cycling.
Cost also provides the biggest driver for adopting new technology – everyone can unite behind the idea of low cost, reliable electricity.
Natural gas as an incumbent power generation and competitor to VRE is also relatively cheap, in part because externalities such as carbon and fugitive methane emissions and other pollutants are not factored in.??Natural gas is also used extensively as source of heat for industrial, commercial and domestic users – the best alternative to burning gas is renewably generated electrification rather than a switch to hydrogen. However, to compete with natural gas, electricity pricing needs to be low to support the return-on-investment decision. Afterall ‘saving money whilst saving the planet’ is core to a successful theory of change.?Factoring the true cost of climate change is considered outside of the decision cycle/investment return timeframes of most industrialist investors, particularly incumbents.
As an example, electrifying an existing domestic home to replace gas fired space heating, water heating and gas cook-tops requires capital investment for the replacements: heat pumps (aka reverse cycle air con), solar / electric booster or storage hot water and induction cook-tops. That outlay will need to provide a financial return for most people to make that investment – hence low-cost, reliable electricity competing directly with natural gas is essential. Energy efficiency measures are of course integral to the transition.
Encouragement and incentivisation of fuel switching initiatives is a near-term imperative and this must be driven by policy-makers for individuals and markets to respond to.?Electrification adoption would improve greatly if a price on carbon was introduced.
While examining costs, it is important to note also that deep grid decarbonisation (i.e. >90% VRE) results in an increased LCOE for the final stage of decarbonisation. However, when those costs are amortised across the energy mix the investment is still economically viable.?
Scale
The combination of power electronics, smart configurable software, time sensitive pricing and tariff signals and positive international and local operational experience allows inverter-based resources (IBR - solar, wind and batteries) to operate at GW scale as dispatchable generation (Ref 21).
Inverters are power electronics that convert Direct Current (DC) from solar photovoltaics (PVs) and batteries to the Alternating Current (AC) used predominately on the grid. Long-distance high voltage DC transmission is more energy efficient as you don’t transmit wasted reactive power and is used in certain applications – e.g., TasNetworks’ Project Marinus link from TAS to VIC is a HVDC (high voltage direct current) interconnector.?Due to the high power delivery, this technology can be applied effectively when planners take into consideration and there is tolerance for significant contingency events and consequential supply interruptions.
Wind Turbines Generators (WTG) come in a range of sizes and configuration: utility scale WTG sizes range from 2 to 14 MW and are available as DC generators, AC synchronous or AC asynchronous generators in onshore or offshore locations. Even the AC units will generally contain rectifiers (AC / DC) and inverters (DC / AC) to help with WTG power control optimisation and managing grid connection. Hence, they are considered as inverter-based generation from a grid connection and grid control perspective.
To give some idea of scale, the current NEM generation capacity is around 55GW, the UK as of May 2021 have an installed capacity of 24GW of onshore and offshore wind alone (yes, and the wind doesn’t always blow). The single Star of the South offshore windfarm in Victoria has a planned capacity of 2.2GW.?Many areas of Australia have excellent onshore wind resources with high (~50% capacity factors). The cost of onshore wind is approximately 50% on capex and significantly reduced maintenance cost when compared with offshore wind. However, offshore wind enjoys higher capacity factors and correlates well with and is complementary to onshore wind. Design and consequent cost impact considerations apply in cyclone affected locations.
Variability
Wind and solar are correctly called Variable Renewable Energy (VRE) recognising the sun doesn’t always shine and the wind doesn’t always blow.?
VRE are sometimes incorrectly labelled “intermittent” either by mistake or deliberately - intermittent means “occurring at irregular intervals; not continuous or steady”. The truth in Australia is that solar and wind energy turn out to be, on closer examination, regular and given the right data inputs, predictable and forecastable on an annual, daily, hourly and minute-by-minute basis. Clearly, grids with high levels of renewables do need to keep a close eye on the weather (meteorological data and other forecasting data more broadly) and the overall system needs to be ready to respond quickly to events such as ‘passing clouds’ impacting VRE output.?
Consideration needs to also be made for daily synchronisation of load vs supply timing.?Typically loads increase towards system peak in the early evening, this is at a time when solar output is reducing towards almost zero.?Modelling by Sustainable Energy Now in 2016 shows that it is important from a dispatch perspective that the wind generation capacity is greater (typically more than double) in installed capacity than solar PV {Ref 26}.?The reason for this is related to both time of day output and capacity factor of the generation type.
It is therefore a requirement in a 21st century grid for lots of data, data visibility across the network, flexible generating assets (including network inter-connectors and storage assets), quick response (hence for example the AEMO new ‘5 Minute Settlement’), smart software and suitable energy market rules to manage the technology introduction, its variability, and associated risk and opportunities: smart energy traders love renewables and batteries {Ref 6}.
As a demonstration of how important ‘tech’ is to this 21st century grid, a new market entrant in the UK market, Octopus Energy, have created a very successful retail electricity supply business specialising in sustainable energy on the back of their IT capability, not as an experienced ‘gentailer’ (electricity generator and retailer).?
How to manage the variability is work in progress - some of the first context setting questions are:
As an illustrative example only, Figure 1-2 below shows the annual wind profile for Hobart {Ref 3} – as you’d expect the wind speed varies throughout the year with the lowest speed around 78% of the maximum but still sufficient to generate significant power output: depending of course on your location, how individual wind turbine generators (WTG) and the overall wind farm is designed. Whilst there will be times of no wind, wind resources around Australia do not suffer from a ‘wind drought’ as northern Europe experiences in January when wind and solar output is low and energy demand is high {Ref 2}.?
Figure 1?2: Annual Wind Speed Profile – Hobart
This analysis impacts the extent and sizing of the ‘storage’ options (see VRE Management Options section below).?To better understand the local context, you can build a picture of annual variations and the correlation between different VRE sources in the energy mix such as onshore wind, offshore wind and onshore solar and compare this to the annual demand profile and the resultant under and over supply. This is partially illustrated in Figure 1-3 below and gives an insight as to the extent of the ‘storage’ challenge in a localised context. This figure was extracted from the recent ‘Blue Economy Offshore Wind Energy in Australia’ report {Ref 2} and looks at a hypothetical forecast (with three separate offshore wind farm locations) for a sample week with maximum renewable production (10 GW Solar, 9 GW Onshore wind, 9 GW Offshore wind). Figure 1-3 below shows that throughout the year offshore wind helps fill the gaps when solar is not available.?These sorts of graphs also provide a guide to predicting capacity factors (i.e., percentage of annual full power output in hours / 8760) and used in capacity and economic modelling studies.
Figure 1?3: Newcastle Maximum Renewables Daily Profile
Given this approach using a mixed VRE portfolio, variability can be managed without automatically thinking battery storage is your only option.?Table1-1 below highlights the options - in practice a ‘belt and braces’ would be used to manage sub-system reliability and overall system availability as part of VRE integration studies.
VRE Management Options
Build overcapacity and curtail output when not needed
Overbuild capacity so when a weather event impacting VRE output occurs the system has ‘spare’ capacity that reduces the impact on power output. As an example, I have a 7kW roof top solar array and a 5kW inverter, during peak conditions the inverter ‘clips’ the output at 5kW. However, I can maintain 5kW output for longer during the shoulder periods.
Curtailment is often seen as something to avoid at all costs (‘OMG all that wasted energy’) and spawned the idea of Power-to-X to make use of the excess power available at certain times of the day. When you run the numbers on the ‘X’ you find economics generally only work when you have your ‘X’ assets operating close to 24/7 or typically >~85%.
Because VRE have ‘zero marginal cost’ you can afford to curtail output when not needed or you can ‘time shift’ that energy using the likes of battery or longer duration seasonal storage which is increasingly being co-located with VRE to improve project economics and commercial returns and provide operational flexibility.
Curtailment by network operators while essential for maintaining the power system in (load-supply) balance does presents challenges for encouraging investment due to reduced capacity factors impacting investor returns. Tailored contracting approaches, including reserve capacity payments for balancing supply, need to be considered and are generally accepted industry norms.
Network Inter-connectors
Often the weather impacts to VRE generation output are localised so neighbouring regions and states can share power if network inter-connectors are appropriately sized.
Neighbouring states with different time zones can effectively extend the time solar is available to the interconnected gird. With the increasing amounts of roof top solar, commercial and utility solar this is a significant amount of energy.
Demand side management - domestic, commercial & industrial users
Energy efficiency improvements.
Encouraging users to shift consumption to ‘off peak’ periods (including EV charging).
Paying users to switch-off loads, either indirectly or directly. Often this is momentary (i.e.?<5minutes).
Encouragement (through market pricing signals) for domestic and commercial users to shift flexible loads to off-peak/high supply side time of day periods. Electric storage water heating, electric vehicle charging and pool pumps are examples of reasonably high consumption loads which are not dependant on instantaneous power demand.
In some cases, the revenue provided to some industries for this service provision (through their ability to operate flexibly) is their greatest revenue stream.
Capacity markets can be established to ensure a flexible system at both the generation and demand sides, and that flexibility should be promoted explicitly in market design. Such markets offer greater availability of flexibility potential and also provide the advantage of providing smoothing effects and delivering efficiency gains.
Improved Network Operations
Access to more data, smart software (including AI), improved market rules, greater visibility and control of generating assets (including roof top solar and batteries) and control of key loads allows for improved planning, scheduling and generation dispatch, and better response to upset and fault conditions, contingency events.?
Non-battery Storage
Pumped hydro, compressed air, hydrogen etc.
Pumped hydro storage is available in a few locations – apparently 400m of head is required to make the system work. Very effective when available as a local or regional option in combination with strong network inter-connectors.
Compressed and liquid air energy storage (CAES and LAES) are interesting nascent options and some of the designs are well advanced, offer material capacity and are quite sophisticated?as this example shows .
Thermal storage is another option as is hydrogen. Hydrogen storage (P2G) is an emerging solution for long/seasonal duration, infrequent cycle storage requirements.
In all storage options the round-trip energy efficiency and power costs (and arbitrage) need to be considered.
Capital and system market costs and other performance aspects should be benchmarked against batteries as the reference case.
Battery Storage
Batteries exist at multiple levels: utility scale, community batteries and behind the meter, including stationary batteries and Vehicle-To-Grid or Vehicle-to-Home Electric Vehicles (cars, buses, trucks etc.) and are seen as one of the key enabling technologies supporting increased levels of VRE on the grid {Ref 4}.
领英推荐
Utility scale batteries power output range from a few megawatt (MW) to hundreds of MWs – energy output is measured in MWhr and are currently around the 1-to-4-hour range.?Current state of big batteries in Australia is?located here .
In general, energy storage from lithium storage batteries is suitable for very short (nanosecond duration - primary and secondary frequency control) to medium term: 4-hour max duration - defined largely by capex.?The response times of batteries compared with conventional ‘droop’ governor controls of rotary generation is greater and therefore for this and the ability to access other revenue streams, batteries are increasingly being selected as a preferred choice of storage.
With falling prices, improved software and hence functionality, changes in market rules and positive operating experience, utility scale batteries are increasingly popular both technically, commercially and as a bankable infrastructure investment asset class {Ref 5,6}.
A positive rule change on the settlement period (currently 30mins) to 5 minutes is about to be implemented for the NEM in October 2021 {Ref 28}.??This rule change referred to as 5MS (5-minute settlement) will have an enormous ‘pull’ effect on battery introduction due primarily to the response time of batteries out competing (for example gas turbines) whose ramp times incur the costs of hot standby fueling.?The rule change is expected to have the highest impact on battery deployment on the NEM.
Batteries offer system services that cannot be provided by conventional generation.?In times of excess VRE supply, batteries become loads in addition to their supply role in times of supply deficit.
A 21st Century grid will integrate all these batteries and other Distributed Energy Resources (DER) using technologies and commercial arrangements such as the Virtual Power Plant being trialled in South Australia {Ref 8} and Home Energy Management Systems, and their commercial and industrial equivalents – Power Management Systems {Ref 9}.
Increasingly as battery prices fall, the level of interest from domestic consumers is rising.?As of May 2021, there were over 110,000 batteries installed in Australian homes (31,000 were installed in 2020 alone) {Ref 27}
Battery storage offers not only the ability to time-shift (aka energy arbitrage) VRE production but also provide system security/uptime during times of adverse weather or power outages.
Non-VRE / non-battery generation flexibility
This involves the ramping-up and down of (say) gas fired open cycle gas turbines to cater for changing VRE output.
However, batteries are increasingly performing this role cheaper, with faster response and better performance overall than OCGTs and pushing them out of the market into more occasional stand-by/lengthier duration/infrequent cycling role.
On smaller islanded networks where the reliability of individual generation assets is more critical, then suitable local battery storage can be added and act as a virtual synchronous machine such that this reserve capacity does not need to be ‘spinning reserve’, i.e., burning gas and operating on no load waiting for an operational unit to fail {Ref 7}.
Network Control
This a relatively complex area and network engineers will have differing opinions on how difficult the problem of getting to 100% renewables in a traditional grid is to solve.
The network as it was in say 1999 with little or no VRE was fairly predictable to control. Designing an off-grid or islanded network with 100% Inverter Based Resources (IBR) is relatively easy and designing a new national grid with 100% IBR would also not pose any sizable technical challenge as all the technology, systems and plans are well known to network engineers.
The challenge is the migration from a grid dominated by synchronous generators that are electro-mechanically coupled to the grid to a grid dominated by IBRs (solar, wind, batteries).
The main areas of network control challenges are detailed the section below.
Network Control Challenges
Visibility and control
When the network operator, whose job it is to control the network and keep the lights on, can’t directly see or control the largest generator on the NEM or SWIS in roof top PV then corrective action is required!
Whilst VRE is inherently variable it is predictable and controllable given sufficient data and modelling of the real time impact on grid operations. That data visibility needs to extended to the wider stakeholder group as applicable.
The data and control information works alongside emerging commercial arrangements and regulatory controls.
Autonomous/inherent control is the most desirable methodology for operation of a distributed network.
With high levels of VRE, legacy equipment (older/dumb inverters) installed on the network are now a serious threat to the balancing of supply and demand on the power system when network interruptions occur.
New emerging inverter technology, control software settings and standards, appropriate system control functions such as grid-forming voltage source converters can be provided that are inherent to the design of the inverter.
Utility or community batteries (particularly when controlled centrally) offer this capability.?In many cases, inverters installed after October 2016 can be upgraded through software updates to provide these functions.?
System Strength - Voltage and Frequency Control
Grid system strength covers a few different areas and is addressed in detail in an AEMO paper and related references {Ref 10}.
Inverters Based Resources (IBRs) have provision for lots of smart control schemes but the majority of legacy units currently operate in a relatively dumb mode to manage grid connection and control.
IBRs are generally ‘grid following’ in that they sample the grid voltage waveform at the inverter terminals and use a phase-locked loop (PLL) to generate a matching voltage phase – that works so long as the sampled waveform looks like those in the left-hand panel in Figure 1-4 below. However, if the voltage waveform becomes compromised due to a network disturbance (e.g., a fault) then the PLL samples a damaged waveform and replicates it, thus adding to the problem.
IBRs can be programmed to be ‘grid forming’ to autonomously form voltage and frequency levels like traditional generators. These act as virtual synchronous machines (VSMs).
They can also be configured to provide system protection, fault ride-through and recovery during faults, network outages and black starts.
Recently in WA there was a transmission level fault hundreds of kilometres from the main load centre (Perth metro area).?This fault was detected by a large number of (legacy) rooftop solar units which resulted in their immediate synchronised disconnection from the system, thereby exacerbating the loss of generation that had been a consequence of the original fault.?Inverter ride-through is therefore desirable and the latest AS 4777 standard have provided for this feature to be incorporated.
Figure 1?4: Voltage Waveforms
System Strength – inertia and frequency control
Thermal electromechanical generators with their large mass and high rotating speeds provide significant amounts of inertia (momentum) that is typically available for a few seconds but sufficient for the power control systems to detect and respond to events.?
?The effect of inertia slows the Rate of Change of Frequency (RoCoF).?This is essential for maintaining the grid frequency within tolerance limits outside of which operation can result in potentially system threatening cascading under-frequency load shedding (UFLS).
?Interestingly no inertia level is specified in the South West Interconnected System (SWIS), although there is a requirement to avoid automated underfrequency load shedding for a single contingency.
?In recent years and like many grids, the SWIS has seen a continually falling nadir of the ‘duck curve’ reflecting low middle of day operational demand. Since system inertia reflects generator and load rotary momentum, the introduction of substantial IBRs and controlled loads (e.g. air-conditioning), has resulted in a reduction in overall system inertia.
?The SWIS with?>1,780MW of rooftop solar and an uptake rate of ~1MW/day is placing serious constraints on system security. AEMO, the market operator, has been issuing SWIS related concerns and warnings that increasing PV uptake will see the danger level of <700MW operational demand breached by as early as 2022.?
?The EPWA DER Roadmap and new inverter standards will partly address this issue but legacy PV inverters remains problematic. This is particularly acute on weekends/public holidays (due to the lack of energy consumption by commercial systems) during the shoulder periods of May and Sept-October due to system load and insolation factors (the amount of solar radiation reaching a given area).?
?The network power load needs to be balanced at all times and when electrical generators or loads are switched on or off (planned or tripped) they cause a disturbance which the grid needs to respond quickly to by adding or ‘removing’ power. If this is not done quick enough then the grid frequency is affected – frequency excursions outside limits causes equipment protection operate making the problem worse (cascade).
Whilst IBRs have no mechanical inertia they can (if appropriately configured) respond extremely quickly by increasing or reducing power instantaneously thus negating the requirement for inertia in the first place (i.e., the need to allow large synchronous machine sufficient time to respond appropriately). The latest inverter technologies being introduced can provide virtual essential system/ancillary services
Due to their fast response and flexibility batteries are increasingly being used in the fast Frequency Control Auxiliary Service (FCAS) which can be commercially attractive for participants.????
This?video on inertia ?is worth watching.
System Strength – protection and fault current
Grid protection devices use the detection of fault current to isolate and ‘clear’ faults to prevent fires, equipment damage and to minimise the loss of supply impact to as few customers as possible.
High fault current levels are desirable as they allow grid protection devices to differentiate normal grid operation from genuine faults.
Large thermal generators produce high fault currents for longer due to their inductive properties - typically 5-10 times rated peak output current.
Whilst IBRs do not currently produce the same fault current levels (typically 2-3 times rated peak output current), a flexible and safe grid operation can be achieved with high levels of IBR penetration using protection studies, simulation, design and upgrades to protection schemes (Ref 11).
Over time as the number of individual unit generators increase in a distributed network, the largest generators will be relatively small compared to legacy large generators thus reducing the system (N -1) risk.?
Power, Politics and Policy
You know something is afoot when you read a 2020 electrical network system Integrated System Plan (ISP Ref 15) that makes no mention of carbon intensity abatement, assumes coal plants continue to operate to their natural retirement and with no recognition of the role the grid can play in decarbonising other sectors with the resultant massive increase in electricity use. When the ISP was aired to an online public forum the most ‘liked’ question was around carbon intensity.?
The?single?biggest hurdle VRE faces is vested interests not because they could replace fossil fuels but because they?can?(Ref 17).
The fossil fuel industry is smart, well-resourced and very well connected – whilst climate change and clean energy are signalling the end of the fossil fuel age, they are beating a well thought through strategic retreat. Each position is well defended in an attempt to keep themselves relevant and in business.?They continue to have significant impact on energy policy thus slowing the energy transition.??Coal is Australia’s second largest export, petroleum gases are the third with combined exports totalling US$59.4billion in 2020 – money talks despite the science.
How power, politics and policy play out in the energy transition takes many forms. One of the more noticeable and damaging is the policy vacuum that tends to favour the incumbents in the short term over disruptive technology like VRE. That policy vacuum means that regulators (i.e., AEMO, ESB, AER, AEMC) can’t do their job properly, they and industry are put into impossible positions, regulations can’t keep up, technology can’t be effectively adopted, new entrants are faced with both uncertainty and structural barriers (i.e., policy says one thing but practice is another), investment is slowed and prices stay high. Those structural barriers manifest as connection and commissioning delays for new projects, out of date market rules, ad-hoc rule responses (such as “do no harm” ruling on network system strength that was overturned after much unnecessary expense by a QLD project (Ref 24)) and project economic killing rulings such as retrospective Marginal Loss Factors applied to an individual development (Ref 25).?
Publication and factoring of emissions in generated power is a serious need in order that emissions targets may be determined in order to meet climate objectives, for example Paris/COP21 obligations. A positive measure has recently seen the Australian Stock Exchange implementing requirements for companies to demonstrate their sustainability and carbon emissions reduction.?Furthermore, companies are being queried in particular from European investors as to their “net zero” compliance (Ref 29).
Whilst there are always challenges in deploying new technology, the perfect should not be the enemy of good. As South Australia have demonstrated with political will you can develop the right policies, the right incentives and modify regulation and market rules to achieve high levels of VRE penetration, and have a safe, reliable grid with cheaper electricity.
Summary
The required technology is here and solutions to decarbonising the grid are available and proven in use. Getting to 100% renewables or close to that is possible as modelling by SEN (Ref 23) and others have shown.?
Hurdles are not of a technical nature, nor of cost, nor of public support but of vested interests, power and politics. The transition won’t be easy and there will be mis-steps along the way.
Suggested solutions:
1.??????Get informed on the topic, listen to dissenting opinions, form your own position based on all the facts. Try to make sense of the world – you might need a little help from the likes of Daniel Schmachtenberger, Jamie Wheal, Jordan Hall, John Vervaeke;
2.??????Stop doom scrolling and get into action;
3.??????Find out if your local council has declared a climate emergency and working on an action plan – get involved;
4.??????Join a community group or specialist group – find the others;
5.??????Buy an EV;
6.??????Electrify your house and business;
7.??????Meet or email your local MP and tell them your concerns;
8.??????Make a submission to the Integrated System Plan, attend public forums, lend your voice – nothing changes until everything changes;
9.??????Vote for independents;
10.??Support peeps like NSW MP Matt Kean (Ref 17)
?
References
2.??????https://blueeconomycrc.com.au/webinar-event-offshore-wind-industry-panel-discussion/ ?https://www.dropbox.com/s/nzrhz0bqwy3vu6y/BECRC_OWE%20in%20Aus%20Project%20Report_P.3.20.007_V2_e190721.pdf?dl=1
5.??????https://www.energy-storage.news/blogs/batteries-as-an-infrastructure-asset-class-a-new-paradigm
14.??https://www.nrel.gov/news/program/2020/inertia-and-the-power-grid-a-guide-without-the-spin.html
Wealth Tree Solutions
2 年Well done Ian
Director Investor RETIRED NO RECRUITERS PLEASE
2 年I remain unconvinced that reliable renewable energy isn’t going to cost a hell of a lot of money wich is then going to increase the cost of living for struggling taxpayers. And frankly the idea that it’s immoral to continue using hydrocarbon energy in Australia because we are a major contributor to climate change is simply laughable. The protagonists should be more concerned with the uptake if thermal coal power in Asia than moralising Australians. They should also put their money where their mouth is and create Australian jobs building wind turbines solar panels and batteries right here in our backyard.
Independent energy consultant, author of the best-selling "My Efficient Electric Home Handbook".
3 年MY EFFICIENT ELECTRIC HOME When Facebook gets back up... folks can check out what our 35,000 members are doing at My Efficient Electric Home!
Associate @ Ecotect-Architects | Designing Sustainable Buildings
3 年Ian, recent analysis by Tony Sena on misrepresentation of the value of our traditional power generation systems: https://m.youtube.com/watch?v=YJ-HlykM1LU
Process Engineer CPEng NPER
3 年A few points need to be thrown into the mix. Firstly, hydrogen isn't going to happen at a cost effective end user price any time soon. It is highly likely that batteries will out perform all other forms of long term storage very soon. Secondly, for Australian industry with access to the NEM to fuel switch to electricity, the NEM will require an additional 30% more generation (and that's without EVs). Thirdly (and most importantly), the total generation+transmission+retail margin is what industrial businesses care about. Right now the short run break-even cost of fuel switching is nowhere near the cost of operating on gas, especially with cogen. The tariff methodology needs to change and the low-risk, good profit models are not fit for the future for transmission and industrial retail. There are a lot of challenges to be overcome before the legacy industries can afford to change.