Consider this: Dewatering Filtration - Bridge Inspection Abutment Issues

With the blizzard of 2016 and the rain storms in the south will cause major destruction to our bridge and marine infrastructure due to flooding and high tidal issues.

A simple solution to a potential problem in regards to Dewatering and Erosion Control with our bridge abutments, MSE retaining walls and sheet piling properties.

Help save our bridge and marine infrastructure today...

Consider this: Dewatering Filtration - Bridge Inspection Abutment Issues
https://jetfiltersystem.com | Civil Engineering | Backed by civil engineers, marine contractors, project managers, government and state officials. A lack of erosion control that causes sinkholes is a vital issue among a retaining wall design. One common problem is wall movement in addition to tieback/whaler tension, toe failure, horizontal cracking, panel separation and stress. This video will show a sink hole that undermined a bridge on the George Washington Memorial Parkway in Arlington, Virginia USA December 4th 2014 ways to prevent this problem and to save the bridge and marine infrastructure from failing. For retaining walls such as steel sheet piling, vinyl sheet piling, bridge abutments, concrete seawalls or any other earth retaining structures.

The standard dewatering JET Filter System comes equipped with the highly rated TenCate Mirafi FW 300 series. This proven application provides long-term flow rates in dynamic and high gradient conditions. To ensure proper drainage relief, one of the key components to our JET Filter System is a removable inner filter cartridge that can be replaced or cleaned when needed. This simple step can be accomplished from the front side of the earth retaining wall structure without removing material behind the wall to replace the erosion control fabric.

To save time and money on major extensive repairs the JET Filter System is a quick and easy way to install that would prevent the bridge and marine infrastructure failure by relieving water pressure and allowing the proper drainage.

The life expectancy of an earth retaining structure can be increased simply by adding sufficient drainage. Dry soil may provide little stress on a retaining wall, however heavy soil without proper infrastructure wall drainage may cause the wall to buckle or lean. This could mean extensive and expensive repairs will be required. No drainage system can handle a total flood, but a properly installed "retaining wall drainage" system can prevent most water damage.

Civil engineers and designers know how important it is to keep retaining walls from leaning or cracking from hydrostatic water pressure, it is important to install the dewatering Jet Filter System to release this water pressure and by not allowing any loss of soil material within the structure.

Proper maintenance and inspections can also avoid major disasters. Water without drainage may weaken retaining walls by eroding the material that supports the wall. Furthermore, poor drainage may cause considerable challenges by settling behind the wall and saturating the soil with incredible pressure. Well-built earth retaining walls are built with integrity and our Jet Filter System is designed to provide water pressure relief without losing our valuable soils from within the civil engineering designed wall.

Are your retaining wall structures failing because of clogged drainage or perhaps insufficient weep holes? Retaining walls such as vinyl sheet piling, steel sheet piling, concrete seawalls, wing walls and bridge abutments are a concern today and may require immediate inspection or replacement.

Need help with saving our bridge and marine infrastructure today?

Call us today at (800)475-2029 or visit us on the web:
https://www.jetfiltersystem.com