Common Mistakes to Avoid When Installing Decking Tiles

Installing composite decking can be a good way to enhance the look and functionality of your outdoor living space. However, just like any home improvement project, doing it properly is important for longevity. Decking Tiles make decks attractive and beautiful.

Improper Ground Preparation?

The ground on which your composite decks will be built should be leveled and clear of debris. In case the ground is uneven, this will in time make your decking warp or bend. You should also provide proper drainage so that water may not accumulate under the deck.

Incorrect Spacing

Incorrect spacing between the interlocking decking boards is one of the common mistakes people make in composite decking installations. This causes the decking to warp or buckle over time; therefore, keep the decking boards evenly spaced apart to allow for expansion and contraction. We would recommend maintaining a gap of 6mm at both end-to-end and side-by-side boards; this is easily achievable with the hidden fixings to obtain this spacing.

Skimping on the Joist Spacing

This is one of the most common mistakes people make when installing composite decking. Inadequate joist spacing can result in poor support, warping, or bending of the decking tile over time. Also, be sure to double-joist all end-to-end boards.

Wrong Fasteners

The wrong fasteners can also create problems in anti-slip decking. For example, if you are using nails instead of screws, then the decking will come loose over time. Be sure to use fasteners specifically made for composite decking for a good hold.

No Cleanliness

Not properly cleaning and maintaining the Garden Decks. This, again, is one big mistake made by many while laying composite decking material. Poor maintenance causes it to discolor over time, losing its good look. More often than not, it requires constant cleaning of mild detergent mixed with water to prevent plant debris from sticking and thereby causing stain on the material.

Identification of Type?

Proper identification of the type of decking tile UK you are working with is important for proper selection and installation of fixings. All decking types have different profiles and patterns that require specific fixings to perform optimally. Otherwise, you run the risk of using incompatible fixings that will either not perform the function for which they were designed or could damage the material of the decking.?

Identifying the type of decking can be quite an onerous task, more so if you do not know the manufacturer or the profile looks alien. By avoiding these common mistakes, you can be sure that your decking will be installed right and will last for years to come.

?Remember, proper preparation, spacing, joist spacing, use of the right fasteners, and regular maintenance are key to a successful decking installation. Always check with the manufacturer's guidelines. If in doubt, it is always better to hire a professional decking installer to ensure the project is done right. Composite Decking Tiles are best for decks because these tiles make deck attractive.

It should be obvious that any wood used to construct a decking substructure needs to be properly treated. Sides, ends, top, and bottom. This also applies to sub frames constructed for composite decking installation.