Collective HU count and Collective HU Item count with Serial type B
From EWM 9.4, SAP provided 2 options for Physical inventory counting process related to HU counting in RF.
1) Collective HU count- Facilitate counting by entering the total count results without verifying each HU number. This is applicable to such a business requirement when Product is serialized and its asked just to validate number of HU without verifying each Serial number in case Counted qty= System counted. Imagine HU having 50+ serialized qty, RF counting process would be highly compromised.
This could also be used for customer keeping Multi HU stock( Nested HU) and its makes sense to just to count the number of Top HU.
In the above example, 5 pallets with 9 Boxes in each.
Perform the PI counting in RF with Collective HU counting.
By entering the number of HUs in a storage bin. If the total number matches, the RF device displays COMPLETE for all HUs.
The PI document is marked with completed as number of counted HU matches with actual Booked HU inventory from system without scanning serial number
2) Collective HU item Count:
Perform the Collective Hu at item level.
In the storage bin, there 4 full Pallets and one Partial Pallet.
Perform the count using 'Collective HU Item count'.
领英推荐
The moment the Qty per HU, number of HU and Partial qty gets matched with system counted, all HU is auto marked as completed and no serial number is prompted to scan.
The counted Hus gets auto completion indicator
Important Point:HU collective counting is supported only for Storage-Bin-Specific physical inventory procedures
HL - Ad-hoc Physical Inventory (Storage-Bin-Specific)
AL - Annual Physical Inventory (Storage-Bin-Specific)
EL - External Procedure (Storage-Bin-Specific)
Customers implementing serial number having type B and C must fully weigh the importance of Handling unit management as this drastically reduces the effort of extra scan during PI count. Not only this, it also helps in manufacturing during consumption of serialized HU. System will just prompt to scan HU not each serialized Product.
References:
3330953 - Simultaneous Posting After Count does not work for newly counted HU
Associate Director @Innoverv | SAP S/4 HANA EWM/TM/WM/IM/MM/QM | Ex-IBMer | Ex-Capgeminite
1 周Hi Shailesh... Thank you for this article.. Do you know if there is any way serial number scanning/verification can be skipped during Cycle Counting Physical Inventory as well ?
Project team leader EWM SAP en STRATESYS
9 个月and if there are differences? I have not been able to save it with the RFUI.
Solution Architect SAP –EWM
10 个月Thanks for sharing