Ceramic insert Vaccum casting technology

Ceramic insert Vaccum casting technology

The wear spare parts by ceramic insert vaccum casting is high wear resistant, the life span is several times of the traditional material.?

The technology is suitable for production of Blow bar, Jaw plate, bowl liner, Mantle/Concave, Grinding roller, Liner, Chute liner, Hammer, and etc....

the technology is suitable for production of high manganese wear parts, high chrome wear parts, and alloy steel wear parts.??

According to the user after the use of feedback statistics: The average wear depth of the high-chromium composite casting roll sleeve and liner of coal mill is 2-3mm per 1000 hours; the service life of the MMC-Cr blow bar is more than 2 times of that of the common high-chromium blow bar; MMC blow bar crushing cobblestones wear less than 1 mm per hour; MMC blow bar crushing granite less than 0.8 mm per hour; The service life of marteniste steel ceramic composite mill liner is more than 2 times of that of conventional mill liner or SAG liner, the service life of high chromium ceramic composite scraper, blade and liner is more than 3 times of that of conventional products, and the service life of high manganese steel ceramic composite casting concave/ mantlel is more than 2 times of that of conventional products.