CAD′S OF: Marius Imiolczyk: CFD APPLICATION

A couple of months ago, traveling on the internet looking for information and knowledge about CFD applied to Formula 1, I found GrabCad (web whose main objective is the exchange of Cad files), a simulated CFD rear wing. The work was done by Marius Imiolczyk. You can see his profile in LinkedIn:

https://www.dhirubhai.net/in/marius-imiolczyk-b50ab3158/

My surprise was when besides seeing images of the CFD simulations made by Marius, I also found the Cad of the front wing; I downloaded it immediately and analyzed it looking for possible failures to repair them: it had no failures and it was perfectly useful to test it in CFD directly. This was great and good news: not having to repair a Cad to be able to test it in CFD; normally, you always have to do it...:

The surprise increased because I found in his GarbCad profile, other front wing and rear wing models; I used all of them, to exchange them in a complete F1 model I have (Perrin model). This way, I can try different parts on the same car, to observe aerodynamic changes in downforce, drag or aero balance:

I want to thank Marius for freely offering this kind of interesting and useful cad's.

It's a pleasure to meet good aerodynamic engineers like him to exchange cad's and simulations, to learn.

I hope to work with him in some CFD project to learn: incorporating the suspension in a car to see its reactions in the curve for example, or seeing the deflections of the front wing for example, etc... there are many simulations and studies to do.

Thank you very much Marius Imiolczyk.

The Marius CAD′s folder or profile, is:

https://grabcad.com/marius.imiolczyk-1

Thanks again.

---------------------------------------------------------------------------------------------

https://twitter.com/TimoteoBriet/status/1268592874125496320?s=20